Monitoring & Controlling Ecodan via CN105

[Timbones (Tim)]

@Dan_Nichols

My FTC5 unit is currently running in Eco DHW mode and I think I can see evidence of this. The early morning DHW runs are scheduled at 5am and are peaking at 52Hz, the afternoon DHW run is a forced run (time changes daily) and is peaking at 64Hz. The unit reports it is in Eco DHW mode throughout.

There was a discussion last year about Eco Mode for DHW vs. Force which may be of interest.

Another way (on FTC6) to limit power consumption is with Quiet Mode, which seems to keep compressor below 50% (50 Hz) on mode 1 and 75% on mode 2, even when forcing DHW to “Heat Now”.