9 January 2023 10:28
I seem to have a problem with Virtual Feeds
On 2 of my devices which have the following Versions
My Virtual Feed which is configured as:
Shows a zero value when added to my Dashboard.
However with the following versions (on another device)
It works fine
I reported the same issue a while back -
Virtual feed not updating
9 January 2023 14:39
Same here. Virtual feed are broken after update to v11.2.10. It seems that the values are calculated correctly, however neither the first nor the last values. Therefore, 0 is shown in the feed overview.
9 January 2023 14:50
9 January 2023 15:25
Please put all comments on this thread.
Perhaps I’m doing something wrong, some help would certainly be appreciated.
Since I fitted a new preinstalled sdcard I’m having an issue with Feeds that are ‘Virtual’ and have calculations. The value of these feeds is always ‘ZERO’ now. They always worked before.
Here is an example.
Here are the two source feeds I’m using.
Here is the Virtual Feed.
And its result is shown as ‘ZERO’
Am I misunderstanding the use of Virtual Feeds?