Hi…
Thanks to this post I’ve made some progress…not with a direct RS485 connection to the inverter, but via a TCP-based MODBUS connection using the Solarman integration in home assistant. It is a bit of a pain to get the wifi stick configured on the inverter but if you manage to fluke it then you can get access. What I was completely stuck on where the MODBUS addresses to get to registers I need to read…thanks to the posts here and some of the links provided I’ve been able to scrape together quite a bit of data. However, none of the addresses that actually work are the same as those posted in the Solis documentation…can anyone point me to a MODBUS map for a S6 inverter? I’m thinking there must be one somewhere…it’s hard to guess your way to the right registers…
Thanks!