A couple of better pictures of the emonTx5:
6 CT configuration:
12 CT configuration:
Temperature*, USB serial, emonVs and analog ports:
*The SD card slot is not applicable to the emonTx5 as there’s no RaspberryPi inside - this is a RFM69 433Mhz radio transmitter node only. These are the same back and front fascias as used for the emonPi2, we are only changing the top fascia to have the specific emonTx5 branding.
*Temperature sensing is only available when using the single phase emonTx5_CM_6CT_temperature firmware based on the emonLibCM library. There is a slight impact on electricity monitoring accuracy when using temperature sensing, see forum post for the emonTx4 here.