in expended mode, the heating is shut down when Temp is 3/16K (0.1875°) abobe the target T and reactivated when T is 2/16K ( 0.125°) under the target T + it include the active mode
I’m in Active mode, The system control calculates a new target room temperature that is used to adjust the flow temperature.
– Difference = Set target room temperature - current room temperature
– New target room temperature = Set target room temperature + difference
About your hypothetical example, it cycles following the result of the energy integral.
Each °/min above the desired Flow T is added to the -60° ( adjustable) , when at 0, it stops. Then it go down but I don’t know which DT it take into account (EDIT : it’s the same DT between flow and desired T and substract from 0°) , once at -60°, it kiks in again, etc , etc
well if in Active or Expanded mode