Updated emonSD-03May16 after 2 years, and now no log file, no backup

a23452533 · 2021-01-29T23:56:05.574Z

I updated after not touching emoncms for a couple of years.

I now get a log file error on the admin page and I can’t see the backup option.

I could start with a new image, but I’d prefer to keep the data and the feed setup.

Can my installation be fixed or should I start with a fresh image. How can I export/restore the data and feeds?

Thanks for any pointers.

image1539×910 38.3 KB

borpin · 2021-01-30T13:30:27.587Z

Welcome,

I am surprised it did update - that base image is very old.

It is too difficult to debug - create a new SD card and import your data.

emonSD-24Jul20 release emonSD

Updated: The latest emonSD image build is now ready. This image replaces the emonSD-17Oct19 SD card image. This new image includes the latest Raspberry Pi OS and all the latest version of the OpenEnergyMonitor and Emoncms packages, including use of python3 throughout (thanks to @bwduncan, @alexandrecuer and @borpin). The image was built using the EmonScripts automated image build script: github.com/openenergymonitor/EmonScripts Base image: Raspberry Pi OS (32-bit) Lite 2020-05-27 Image down…

https://guide.openenergymonitor.org/setup/update/#upgrading-to-a-new-emonsd-image

a23452533 · 2021-01-30T18:11:54.166Z

Thank you for the reply. I’ve now done exactly that with a fresh image, and USB import, and now have all my data back.

Lots of new stuff to play with by the looks of it - I’m sure I’ll be back with questions

Cheers

pb66 · 2021-02-02T22:47:01.812Z

borpin:

I am surprised it did update - that base image is very old.

The issue there is that the oldest images do not check to see if updating is suitable before doing so. It’s only after the emonpi repo has updated that it then knows to “check first” but it’s too late by that time.