Hi All,
I would like to know if there is a function in the WUI to trigger relay 1 and relay 2 on the OpenEVSE v5.5 board.
I have looked through the source of the WUI and have not spotted anything; however, I have found the two relays in the EVSE board.
I have found the topic about using a dashboard for OpenEVSE control; however, this topic is about the main relay and a separate dashboard not the WUI.
The 2012 Olympic Park had lots of extremely expensive proprietary EV chargers installed; however, many were not installed. A colleague gave me one of the chargers.
The charger has a door which opens to reveal the charger port; I have built a relay and separate power system for the door opener (a Ford Mondeo window opener). This protects the OpenEVSE board from over-demand on the 12 V relays.
I appreciate any help and knowledge.