I figured well it is thread on TED1001 I might as well included an updated to include the for mention ted1001 RDU hack above. for those who have hacked their TED 1001 and wish to upgrade to emoncms for data logging. one of the advantages to hacking ted1001 RDU it can capture the data from several MTU units at once . the software that i included from my old ted project can do 3 ted MTU but more can be added explained in the readme
runfiles.zip (2.4 KB)
tedstart.pl -----is a simple watchdog for ted1a.pl
ted1a.pl ----is the packet decoding and MQTT send app . it also has quality control. for the Ted 1001 RDU. sometimes if the data stream becomes corrupt ( noisy powerlines) you need to reboot the ted1a.pl to correct the issue. or if it looses USB serial connect it need to relocate it again. after 22 bad or lost keys . the software will shut down and then automatically reboot the over all process is less then a couple seconds
simply install these 2 file to what ever device you have your ted 1001 RDU unit plugged into ie Raspberry/orange Pi , computer or router ( if you know how to install third party apps into your router ) then simple edit ted1a.pl with your network information and your devices MTU hex ID simple configure tedstart to run at boot