Help needed for installing emoncms on a Docker Debian container

remino · 2020-05-09T09:37:13.219Z

Hi all,
I tried to install the emocnms using this script
wget https://raw.githubusercontent.com/openenergymonitor/EmonScripts/stable/install/init.sh
chmod +x init.sh && ./init.sh

in the config.ini I set the emonSD_pi_env = 0

after the installation im not able to perform an update through the admin page (/var/log/emoncms/emonpiupdate.log does not exist)

The Feeds cannot be written ( Activating Auto-restartService is not running 855 feed points pending write)

At least, im not able to enter in the console, user:pi pw:emonpi2016 don’t work

Thanks all for any help
Remo

borpin · 2020-05-09T16:03:32.267Z

Solved in another thread so I will close this

Feedwriter: Activating Auto-restartService is not running10 feed points pending write Installation

Hi All, I used EmonCMS without problems for some years. My old Synology died for a few days So I bought a QNAP (TS251+), I installed Debian 10 in a container using docker. Also installed using the script, EmonCMS Version 10.2.2 (low write). All fine, except two thing. feedwriter: Activating Auto-restartService is not running10 feed points pending write (after a restart, all data are lost on Emoncms) I searched over the internet for the right user/password to log me in in the co…

borpin · 2020-05-09T16:03:39.798Z