Getting started with a Raspberry Pi 2b and TXV4

[Matthew_Lee]

Thanks Robert, I was a bit tired last night I think… Today I have 24hrs of data and can see what is going on. Yes the E values are cumulative energy in kWh for each of the power measurements.

I’m not sure why some of my E values started out with random negative values but they eventually crept into positive territory. I did a quick search, and used the following post to zero the E values and now everything is as I’d expect it to be:

EmonTx4 cumulative energy input is negative - do I just add an offset to the input?

Hi folks, I have just installed my brand new emonTx4 setup and I have one persistent data anomaly that I’m not sure what (if anything) to do with. First, here’s the setup: emonTx4 + emonVs + emonBase bundle (order #29921) emonTx4 firmware updated to v1.5.4, though if you can tell me where to look to double-check that, I can’t see it listed anywhere in the emonCMS UI UK plug plus an adaptor for an Australian socket - I understand AU and UK power are very similar Single phase CT1 50A (total ho…

Thank you for your help, much appreciated!

I’ve got one more question, but maybe this should start another topic? Forum etiquette?

Since I have a radio in my TxV4 that I am not currently using (Pi is connected by USB), could I use it to receive temperature measurements from an emonTH2 and pass them through the TxV4 to be logged by the Pi?