I was wondering how many RF data formats there are at the moment? I have some questions, and as I am a bit confused, | would be grateful for any help! As far as I can tell, there are three named versions: Jeelab (called classic or legacy) rfm69n (used when running emonLibCM on the original e…

Well I can only say that my recent Mk2 PV router (English version) kit came with an RFM69CW … What I meant in the table was that the Mk2 PV router kit needed to include the RF hardware option and that the appropriate firmware was used. I don’t know if or when Robin changed from supplying the RFM1…

@borpin message sent There is also some information on how to to simultaneously receive (and perhaps transmit?) two (or more?) 433MHz Radio Formats at once on an emonBase, using two (or more?) receivers/transmitters… [image] Receiving JeeLib Classic and LowPowerLab in parallel emo…

Having looked, I wouldn’t call it “simultaneous”. There are two parallel receivers, not one receiver switching between formats or receiving either format and correctly recognising and decoding it. I know it’s moot, but it could be misleading without a careful explanation.

[image] rupert: There is also some information on how to to simultaneously receive (and perhaps transmit?) two (or more?) 433MHz Radio Formats at once on an emonBase, using two (or more?) Yes, I have been able to transmit as well. I used Node-RED to write commands to the serial port (i.e. /de…

@brandock Thanks for the update.

[image] Receiving JeeLib Classic and LowPowerLab in parallel emonHub I am glad to see the new Open Energy Monitor hardware uses the LowPowerLab radio library. It is great. I’ve been running devices with both libraries for a few years now, and I thought it might be a good …

[image] Robert.Wall: OK? Perfect. Thanks! Brandon

[image] rupert: I have tried, to the best of my knowledge, to put together a table of device vs radio format I’ve created a PR ( Added a 433 Format v device table by borpin · Pull Request #41 · openenergymonitor/learn · GitHub ) with this - here is the page itself as it standsbefore it is check…

Why didn’t you ask first? emonTx_V2_CT123_Voltage_Temp_Pulse_rfm69n.zip (59.5 KB)

[image] Robert.Wall: Why didn’t you ask first? To me? (no idea who that is aimed at). #16 I did above (from Rupert) as he had done the table.

Community

OpenEnergyMonitor

OpenEnergyMonitor Community

Emon Tx V4 and 433MHz Radio Formats

Hardware

Robert.Wall (Robert Wall) 12 February 2023 20:58 23

OK?