Hi there,
My Danfoss SONOMETER 1100 heatmeter gets only partially decoded as follows . I assume this is a rebranded DIEHL SHARKY 775.
Thanks !
emonHub log below
2023-12-26 21:01:33,825 DEBUG MBUS Invalid MBUS data received 63 bytes 408.5 ms
2023-12-26 21:01:33,827 DEBUG MBUS Decoded MBUS data: {“Energy”: [48, “kWh”], “Volume”: [4.815, “m3”], “FlowRate”: [1.094, “m3/h”], “Power”: [8781, “W”], “FlowT”: [37.800000000000004, “C”], “ReturnT”: [31.3, “C”], “Energy2”: [0, “kWh”], “Record8”: [9999, “”], “heat_calc”: [8197.402777777783, “W”]}
2023-12-26 21:01:33,827 DEBUG MBUS 265 NEW FRAME :
2023-12-26 21:01:33,828 DEBUG MBUS 265 Timestamp : 1703624490.014818
2023-12-26 21:01:33,829 DEBUG MBUS 265 From Node : MBUS
2023-12-26 21:01:33,829 DEBUG MBUS 265 Values : [4, 8, 1528, 126.93, 7200, 0.537, 36.9, 25.200000000000003, 11.600000000000001, 68681545, 7, 59243, 67708, 414, 71, 15900, 1.176, 76.7, 75.3, 753796909, 573904670, 572854040, 557059893, 1162, 80.42, 50916, 350, 71, 14400, 1.176, 76.7, 75.3, -50391237, 754587421, 7242.787499999998, 4, 8, 1385, 2137.73, 0, -0.001, 29.400000000000002, 27.400000000000002, 2, 68533364, 7, 0, 70853, 2092, 0, 19000, 0.876, 70.4, 64.7, 754586164, 753928734, 753928733, 753928961, 1110, 2117.81, 50914, 2064, 0, 34300, 1.296, 78.4, 78.2, -50391237, 754587177, -2.3055555555555554, 4, 8, 1051, 183.21, 900, 0.586, 37.7, 36.4, 1.3, 68681444, 7, 59243, 67705, 352, 72, 17000, 1.248, 77.4, 77.5, 754387463, 589889543, 556928029, 556928029, 680, 133, 50917, 285, 71, 16000, 1.248, 77.4, 77.5, -50391237, 754587406, 878.1861111111139, 48, 4.815, 1.094, 8781, 37.800000000000004, 31.3, 0, 9999, 8197.402777777783]