Hi again, I’m making progresses with the project.
I have mounted it in a permanent enclosure, and now I’ll improving the math, the event detector (when voltage is inconsistent, too much harmonics…) and the waveform recording if there is a event. After that I’ll do the GUI.
Photos, and video:
The box I’ll be using:
Cut for the RPi and the Display:
Display and RPi mounted:
Top of the Teensy Part:
Bottom of the Teensy part:
Top of the power part:
Bottom of the power part:
Closing the case:
Completed:
The system running:
The data of one phase:
Video of the system running:
.ino and Python files:
Packet_reader.zip (5.4 KB)
Have a nice day 