Bar graph with result consumption - photovoltaic production

Emoncms Emoncms.org
1

Hi,

How could a system be calculated that, in the form of a bar chart, shows the result of each hour of consumption and production to determine if there is a surplus, the result needs to be generated from every hour from .00 to .59, because is how it works in eletric company, it is possible?

Thanks

2

Hello @klxout

I would use the graph interface for this:

image
image919×893 89 KB

  1. Select the period of interest
  2. Set interval to 3600 seconds and put a tick in the Fix checkbox.
  3. Select Delta for both your generation and consumption kWh feeds - or if your using power feeds use Average.
  4. Copy the CSV result into a spreadsheet program to complete the balance calculations?