Hi,
hoe all who celebrate had a merry Christmas.
I received my board from China yesterday. It looks like it will work OK. i have built my EmonTx Arduino shield.
My issua atm is that I cannot see where to change the config in the Firmware source for the bigger Ram on the ESP8266: it has 8Mb (so double the size of the Huzzah board)
Could you please point me towards the area to edit.
fyi, I checked the documentation, & the ESP8266 is correctly connected to the serial port (set by switches: one setting to program the Arduino section, another to program the ESP, then another to link the ESP to the Arduino serial) This board also has a built in CH340 USB>Ser i/f.
Happy New Year!
Doug