EmonTx4 Documentation

Organisation Documentation
3

Latest updates:

  1. There is now a new section in the ‘Adding an emonTx4 to an existing install’ covering adding the required emonhub node decoder Adding an emonTx4 to an existing installation — OpenEnergyMonitor 0.0.1 documentation. There is also a new option mentioned called autoconf which can be enabled at the top of the emonhub config file. This automatically configures nodes based on a list of available node decoders. I will be adding more detail on that in the emonhub documentation section.

  2. There is a new page covering the new RFM69-SPI board the we are shipping with the emonBase New: emonBase with RFM69 SPI (Direct) — OpenEnergyMonitor 0.0.1 documentation . The RFM69 module is connected directly via SPI to the raspberry Pi. A LowPowerLabs format python library is installed by emonhub for use with the new RFM69LPL interfacer.

  3. There is a start on a page for the now legacy RFM69Pi adapter board. The page covers using the RFM69Pi adapter board with the emonTx4 including the option to either use the original JeeLib Classic radio format or update the firmware on the RFM69Pi board to a new firmware that supports the LowPowerLabs format.

  4. Mhz replaced with MHz in the few places I could find via a grep search, thanks @Robert.Wall :slight_smile:

1 Like