Discussion related to the building of a new SD card from the ground up as described by Glyn in his Jan 2016 posting: openenergymonitor/emonpi/blob/master/docs/SD-card-build.md # Archived emonSD-26Oct17 build guide **For download: See [emonSD releases page (Git wiki)](https://github.c…

[image] borpin: Can you subscribe and publish to Mosquitto directly? Is the service running? I did this in 2 terminal windows (one publish one subscribe) to test Mosquitto. Subscribe is not hanging, it is just waiting for something to be published! Thanks to Brian’s suggestion, I did some f…

Thanks Glyn! If it is any help, I have checked the list of servers using netstat -at: Active Internet connections (servers and established) Proto Recv-Q Send-Q Local Address Foreign Address State tcp 0 0 *:1883 : LISTEN tcp …

I’ve built emoncms on a minimal Jessie install and it really was not a big deal. One way of doing this would be to build the prebuilt image and go and look for the files and possibly the settings. Can you subscribe and publish to Mosquitto directly? Is the service running? I did this in 2 termina…

Nice! Good work figuring this out. I’ve updated the build guide as you suggested to make the testing procedure clearer.

I have continued to the installation of emonHub (emon-pi) variant at the end of build section 6. I believe that the emonhub install script given in the first line: git clone GitHub - openenergymonitor/emonhub: Python service linking and decoding input to MQTT & Emoncms && emonhub/install is incon…

I have now completed the build as far as section 9 for Emoncms. Sections 7 and 8 proceeded relatively smoothly once I had mentally merged the instructions given in the section itself with the links to the more detailed outsourced instructions. No other major problems were encountered and no other …

[image] mhamer: tedious and laborious as that might be) I think it can be done with a single apt-get. Try asking on raspberrypi forums. I will take a look tonight. What packages are you missing that you need?

I want the full GUI back together with webmin, tightvnc and apple file protocol in netatalk that I previously installed. My searches to date have not located a single apt-get but I think I could run sudo dpkg -l > file.txt on each build and then run a diff command on the two text files. Hopefully,…

It might well be more involved than I previously thought. I thought I had a script to do this somwhere. I’ve just posted a topic on the RasPi forums to ask the question for you.

[image] mhamer: Thanks to Brian’s suggestion, I did some further testing and have discovered that the problem I had was trying to follow the build script too literally without that deeper understanding of how the MQTT service and the commands mosquitto_pub and mosquitto_sub themselves operate. …

[image] glyn.hudson: I’ve just posted a topic on the RasPi forums to ask the question for you. Following up on a comment to the reply to the question posed by Glyn, I have discovered the following comprehensive guide to install either a LXDE or XFCE based GUI onto Jessie Lite. It also includ…

Community

OpenEnergyMonitor

Home
Docs
Community
Shop
Search

OpenEnergyMonitor Community

emonPi SD Card Build

emonSD

show post in topic

Home
Categories
Guidelines
Terms of Service

Powered by Discourse, best viewed with JavaScript enabled