Emoncms v11 stable release

Emoncms
8

Thanks @Greebo will look into that.

9

@MikeB do you remember what version of emoncms you upgraded from?

10

I’ve updated the emoncms app module to fix an issue with dataplicity which was blocking the config.js script, see: Dataplicity Wormhole & EmonCMS Errors - #10 by TrystanLea. @MyForest this might affect your heat pump app? Just needs a filename change from config.js to appconf.js.

11

Tristan, it would have been the previous stable release. I know there’s not a lot of info to help you, I just accepted it as a feature and fixed my graphs. Then yesterday saw this in my weekly email topic update.

One other issue was that on this and the previous stable release I’ve had difficulty downloading a backup with the download link not working using the Edge browser. Eventually after many attempts of creating & downloading, after a backup creation I right clicked and opened in a new tab which then successfully downloaded a file, though I didn’t check to see if it was valid data because I don’t know to check.

1 Like
12

Thanks @MikeB

13

I just noticed this thread. I’ve done an update and now get this error on any displays using khwperiod values.

image

I’ve another thread I posted this morning with more info Displays failing after running EmonPI Full update - #2 by Mike_Henderson

14

I did a forced refresh of the page in my browser (Ctrl-F5 for Chrome) and that error went away, but my kwhperiod values are all now 0 as posted above…

1 Like
15

@greebo good call there. I’ve done that and can now open displays again. As you say, with values of zero.

1 Like
16

Thanks Il look into the kwhperiod issue

17

Thanks for the heads-up @TrystanLea , I’ve patched it.

1 Like
18

Hi @TrystanLea ,

Yes it is a raspberry pi based system using the emonSD-08May21 image.

Further investigation reveals it is only one particular feed, a daily time series that I was using to display daily solcast kWhr totals. The feed with the 30min solcast forecast is working and displaying as expected.

I probably need to go back to my actual desired outcome which is to display historical actual solar and consumption kWh totals and forecast daily solar kWh totals on a single bar chart with the bars covering the period of 00:00 - 00:00 local time. I use nodered to source and load the solcast 30min forecast into a feed out to 5 days ahead - this is still working with 11.0.5. I calculate the associated daily kWh forecast totals along the way and was loading these into a separate feed (this is the one that does not appear to be accepting new data). The historical daily totals are calculated using a Power to kWh/d input process.

I created a new feed (86400 sec interval) and used the new data import functionality to copy the values from the problematic feed (this works really well by the way). This new feed did initially accept the 4 days of future values which I graphed successfully 30 min ago but now the future values are no longer visible on a graph.

Update: Rebooted the pi, swapped to another browser and cleared out all its caches this morning and the new feed now appears to be accepting data and displaying future data in graphs. :thinking:

1 Like
19

@TrystanLea just about to try and update from 10.2.7 on my PVE container. This is still on Buster.

What might have changed such that a git pull of all of the repos might not fix?

Anything changed in the install scripts?

What package versions is V11 expecting (PHP etc)?

I’m guessing this might be a new Module I need to pull in. Should I delete the old vis module?

20

also tried stable version and master …
still tried reboot + cleaning cache
on dashboard → i still get errro as I’m using much of the period values …

and got error:


EmonCMS Error
-------------
Message: TypeError: result is null
Route: Modules/dashboard/widget/kwhperiod/kwhperiod_render.js?v=3
Line: 746
Column: 34

and if i go over … without login, then i get it but all periodkwh are empty …
if you need more infos - let me know

21

The issue with kwhperiod widget has been raised as an issue on GitHub, and I think I’ve identified the cause - hopefully it’s a quick fix?

1 Like
22

This is also caused by this issue - some people get error messages, some just get zeros, depending how their widget is configured.

23

Thanks @Timbones I’ve applied the fix, available now in master and stable. Thanks again!

1 Like
24

@TrystanLea and thoughts on this query? (Emoncms v11 stable release - #19 by borpin)

25

Thanks @borpin Il take a look shortly.

26

Emoncms.org update

Im part way through upgrading emoncms.org to version 11, so far all of the code relating to requesting data, csv export, app’s, graph & dashboard modules have been updated.

The next step is to update the code that writes data including the features to import csv data and data editing functionality. Il probably get that complete in a few days time.

If anyone see’s anything amiss let me know. E.g dashboard or app issues in particular.

27

@TrystanLea
After update 11.0.7 from 10.8.5 on iOS emoncms app the total today used kWh in the upper right corner is not correct. It sum yesterday + today consume.
On local and remote feed of emoncms the counter is correct.
On the single day in the bottom of the app are reported correct
Thx