Does MelCloud provide Flow Rate?

iPoi · 2024-03-20T22:42:56.106Z

Wondering whether MELCloud can also output the water flow rate in l/min? Anyone found the way to get this from pymelcloud?

Timbones · 2024-03-20T22:56:53.948Z

Hi Nik, welcome to the forum!

Unfortunately, there’s no sign of flow rate on MelCloud, nor can it be read with pymelcloud.

The flow rate is fixed though, and you can read it from the FTC by entering 540 into the Running Information screen.

F1p · 2024-03-22T13:54:22.938Z

It’s available with the MQTT dongle:

FlowrateScreenshot

WiFi + MQTT dongle for Mitsubishi Ecodan Heatpump

@ajdunlop I will make some time to provide as much detail as I can. It’s one of those that I would describe as daunting until you’ve done it (if you know what I mean). I’ll start by providing a list of required hardware and follow up with some instructions/pictures of one of my assembled modules (warning its not a consumer level finished product!). As an aside I noticed that there is someone on ebay selling a very neat looking MQTT dongle which could also be worth a look if you don’t fancy gett…