####################################################################### ####################### emonhub.conf ######################### ####################################################################### ### emonHub configuration file, for info see documentation: ### https://github.com/openenergymonitor/emonhub/blob/emon-pi/conf/emonhub.conf ####################################################################### ####################### emonHub settings ####################### ####################################################################### [hub] ### loglevel must be one of WARNING, WARNING, WARNING, WARNING, and CRITICAL loglevel = WARNING ### Uncomment this to also send to syslog # use_syslog = yes ####################################################################### ####################### Interfacers ####################### ####################################################################### [interfacers] ### This interfacer manages the RFM12Pi/RFM69Pi/emonPi module [[RFM2Pi]] Type = EmonHubJeeInterfacer [[[init_settings]]] com_port = /dev/ttyAMA0 com_baud = 38400 # 9600 for old RFM12Pi [[[runtimesettings]]] pubchannels = ToEmonCMS, subchannels = ToRFM12, group = 210 frequency = 433 baseid = 5 # emonPi / emonBase nodeID calibration = 230V # (UK/EU: 230V, US: 110V) quiet = true # Disable quite mode (default enabled) to enable RF packet debugging, show packets which fail crc # interval = 300 # Interval to transmit time to emonGLCD (seconds) [[MQTT]] Type = EmonHubMqttInterfacer [[[init_settings]]] mqtt_host = 127.0.0.1 mqtt_port = 1883 mqtt_user = emonpi mqtt_passwd = emonpimqtt2016 [[[runtimesettings]]] pubchannels = ToRFM12, subchannels = ToEmonCMS, # emonhub/rx/10/values format # Use with emoncms Nodes module node_format_enable = 1 node_format_basetopic = emonhub/ # emon/emontx/power1 format - use with Emoncms MQTT input # http://github.com/emoncms/emoncms/blob/master/docs/RaspberryPi/MQTT.md nodevar_format_enable = 1 nodevar_format_basetopic = emon/ [[emoncmsorg]] Type = EmonHubEmoncmsHTTPInterfacer [[[init_settings]]] [[[runtimesettings]]] pubchannels = ToRFM12, subchannels = ToEmonCMS, url = https://emoncms.org apikey = xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx senddata = 1 # Enable sending data to Emoncms.org sendstatus = 1 # Enable sending WAN IP to Emoncms.org MyIP > https://emoncms.org/myip/list sendinterval= 30 # Bulk send interval to Emoncms.org in seconds ####################################################################### ####################### Nodes ####################### ####################################################################### [nodes] ## See config user guide: https://github.com/openenergymonitor/emonhub/blob/emon-pi/conf/emonhub.conf [[5]] nodename = emonpi [[[rx]]] names = power1,power2,power1pluspower2,vrms,t1,t2,t3,t4,t5,t6,pulsecount datacodes = h, h, h, h, h, h, h, h, h, h, L scales = 1,1,1,0.01,0.1,0.1,0.1,0.1,0.1,0.1,1 units = W,W,W,V,C,C,C,C,C,C,p [[6]] nodename = emontxshield [[[rx]]] names = power1, power2, power3, power4, vrms datacode = h scales = 1,1,1,1,0.01 units = W,W,W,W,V [[7]] nodename = emontx4 [[[rx]]] names = power1, power2, power3, power4, vrms, temp1, temp2, temp3, temp4, temp5, temp6, pulse datacodes = h,h,h,h,h,h,h,h,h,h,h,L scales = 1,1,1,1,0.01,0.1,0.1, 0.1,0.1,0.1,0.1,1 units = W,W,W,W,V,C,C,C,C,C,C,p [[8]] nodename = emontx3 [[[rx]]] names = power1, power2, power3, power4, vrms, temp1, temp2, temp3, temp4, temp5, temp6, pulse datacodes = h,h,h,h,h,h,h,h,h,h,h,L scales = 1,1,1,1,0.01,0.1,0.1, 0.1,0.1,0.1,0.1,1 units = W,W,W,W,V,C,C,C,C,C,C,p [[9]] nodename = emontx2 [[[rx]]] names = power1, power2, power3, power4, vrms, temp1, temp2, temp3, temp4, temp5, temp6, pulse datacodes = h,h,h,h,h,h,h,h,h,h,h,L scales = 1,1,1,1,0.01,0.1,0.1, 0.1,0.1,0.1,0.1,1 units = W,W,W,W,V,C,C,C,C,C,C,p [[10]] nodename = emontx1 [[[rx]]] names = power1, power2, power3, power4, vrms, temp1, temp2, temp3, temp4, temp5, temp6, pulse datacodes = h,h,h,h,h,h,h,h,h,h,h,L scales = 1,1,1,1,0.01,0.01,0.01,0.01,0.01,0.01,0.01,1 units = W,W,W,W,V,C,C,C,C,C,C,p [[11]] nodename = 3phase [[[rx]]] names = powerL1, powerL2, powerL3, power4, Vrms, temp1, temp2, temp3, temp4, temp5, temp6, pulse datacodes = h,h,h,h,h,h,h,h,h,h,h,L scales = 1,1,1,1,0.01,0.01,0.01,0.01,0.01,0.01,0.01,1 units = W,W,W,W,V,C,C,C,C,C,C,p [[12]] nodename = 3phase2 [[[rx]]] names = powerL1, powerL2, powerL3, power4, Vrms, temp1, temp2, temp3, temp4, temp5, temp6, pulse datacodes = h,h,h,h,h,h,h,h,h,h,h,L scales = 1,1,1,1,0.01,0.01,0.01,0.01,0.01,0.01,0.01,1 units = W,W,W,W,V,C,C,C,C,C,C,p [[13]] nodename = 3phase3 [[[rx]]] names = powerL1, powerL2, powerL3, power4, Vrms, temp1, temp2, temp3, temp4, temp5, temp6, pulse datacodes = h,h,h,h,h,h,h,h,h,h,h,L scales = 1,1,1,1,0.01,0.01,0.01,0.01,0.01,0.01,0.01,1 units = W,W,W,W,V,C,C,C,C,C,C,p [[14]] nodename = 3phase4 [[[rx]]] names = powerL1, powerL2, powerL3, power4, Vrms, temp1, temp2, temp3, temp4, temp5, temp6, pulse datacodes = h,h,h,h,h,h,h,h,h,h,h,L scales = 1,1,1,1,0.01,0.01,0.01,0.01,0.01,0.01,0.01,1 units = W,W,W,W,V,C,C,C,C,C,C,p [[15]] nodename = emontx3cm15 [[[rx]]] names = MSG, Vrms, P1, P2, P3, P4, E1, E2, E3, E4, T1, T2, T3, pulse datacodes = L,h,h,h,h,h,L,L,L,L,h,h,h,L scales = 1,0.01,1,1,1,1,1,1,1,1,0.01,0.01,0.01,1 units = n,V,W,W,W,W,Wh,Wh,Wh,Wh,C,C,C,p whitening = 1 [[16]] nodename = emontx3cm16 [[[rx]]] names = MSG, Vrms, P1, P2, P3, P4, E1, E2, E3, E4, T1, T2, T3, pulse datacodes = L,h,h,h,h,h,L,L,L,L,h,h,h,L scales = 1,0.01,1,1,1,1,1,1,1,1,0.01,0.01,0.01,1 units = n,V,W,W,W,W,Wh,Wh,Wh,Wh,C,C,C,p whitening = 1 [[19]] nodename = emonth1 [[[rx]]] names = temperature, external temperature, humidity, battery datacode = h scales = 0.1,0.1,0.1,0.1 units = C,C,%,V [[20]] nodename = emonth2 [[[rx]]] names = temperature, external temperature, humidity, battery datacode = h scales = 0.1,0.1,0.1,0.1 units = C,C,%,V [[21]] nodename = emonth3 [[[rx]]] names = temperature, external temperature, humidity, battery datacode = h scales = 0.1,0.1,0.1,0.1 units = C,C,%,V [[22]] nodename = emonth4 [[[rx]]] names = temperature, external temperature, humidity, battery datacode = h scales = 0.1,0.1,0.1,0.1 units = C,C,%,V [[23]] nodename = emonth5 [[[rx]]] names = temperature, external temperature, humidity, battery, pulsecount datacodes = h,h,h,h,L scales = 0.1,0.1,0.1,0.1,1 units = C,C,%,V,p [[24]] nodename = emonth6 [[[rx]]] names = temperature, external temperature, humidity, battery, pulsecount datacodes = h,h,h,h,L scales = 0.1,0.1,0.1,0.1,1 units = C,C,%,V,p [[25]] nodename = emonth7 [[[rx]]] names = temperature, external temperature, humidity, battery, pulsecount datacodes = h,h,h,h,L scales = 0.1,0.1,0.1,0.1,1 units = C,C,%,V,p [[26]] nodename = emonth8 [[[rx]]] names = temperature, external temperature, humidity, battery, pulsecount datacodes = h,h,h,h,L scales = 0.1,0.1,0.1,0.1,1 units = C,C,%,V,p [[5]] nodename = emonPi firmware = emonPi_RFM69CW_RF12Demo_DiscreteSampling.ino hardware = emonpi [[[rx]]] names = power1,power2,power1_plus_power2,Vrms,T1,T2,T3,T4,T5,T6,pulseCount datacodes = h, h, h, h, h, h, h, h, h, h, L scales = 1,1,1,0.01,0.1,0.1,0.1,0.1,0.1,0.1,1 units = W,W,W,V,C,C,C,C,C,C,p [[6]] nodename = emonTxShield firmware =emonTxShield hardware = emonTxShield [[[rx]]] names = power1, power2, power3, power4, Vrms datacode = h scales = 1,1,1,1,0.01 units =W,W,W,W,V [[7]] nodename = emonTx_4 firmware =V2_3_emonTxV3_4_DiscreteSampling hardware = emonTx_(NodeID_DIP_Switch1:OFF) [[[rx]]] names = power1, power2, power3, power4, Vrms, temp1, temp2, temp3, temp4, temp5, temp6, pulse datacodes = h,h,h,h,h,h,h,h,h,h,h,L scales = 1,1,1,1,0.01,0.1,0.1, 0.1,0.1,0.1,0.1,1 units =W,W,W,W,V,C,C,C,C,C,C,p [[8]] nodename = emonTx_3 firmware =V2_3_emonTxV3_4_DiscreteSampling hardware = emonTx_(NodeID_DIP_Switch1:OFF) [[[rx]]] names = power1, power2, power3, power4, Vrms, temp1, temp2, temp3, temp4, temp5, temp6, pulse datacodes = h,h,h,h,h,h,h,h,h,h,h,L scales = 1,1,1,1,0.01,0.1,0.1, 0.1,0.1,0.1,0.1,1 units =W,W,W,W,V,C,C,C,C,C,C,p [[9]] nodename = emonTx_2 firmware =V1_6_emonTxV3_4_DiscreteSampling hardware = emonTx_(NodeID_DIP_Switch1:ON) [[[rx]]] names = power1, power2, power3, power4, Vrms, temp1, temp2, temp3, temp4, temp5, temp6, pulse #Firmware V1.6 #names = power1, power2, power3, power4, Vrms, temp #Firmware =