[12:14:33] --- Connection Established ---
[12:16:18] [W][short_cycle:078]: Short-cycle predicted! Increasing Feed temps to force a longer cycle. Current saved Z1 setpoin: 44.0°
[12:16:18] [W][auto_adaptive:059]: Flow limited to 47.0°C (Zone Max Limit), calculated_flow: 48.0
[12:16:18] [D][short_cycle:090]: (Delta T) CMD: Increase Z1 Heat Flow to -> 47.0°C
[12:16:48] [D][short_cycle:074]: Zone: 1: High Delta T detected (1.0°C). Starting timer.
[12:18:35] [D][auto_adaptive:431]: [*] Starting auto-adaptive cycle, z2 independent: 1, has_cooling: 1, cold factor: 1.50, min delta T: 3.00, max delta T: 8.00
[12:18:35] [D][auto_adaptive:218]: Processing Zone 1: climate source: 0, Room=23.0, Target=22.5, Actual Feedtemp: 48.0, Return temp: 42.5, Outside: -7.0, Bias: 0.0, heating: 1, cooling: 0
[12:18:35] [D][auto_adaptive:238]: Effective delta T: 6.00, cold factor: 1.50, dynamic min delta T: 6.00, error factor: 0.00, smart boost: 1.00, linear profile: 1
[12:18:35] [D][auto_adaptive:289]: Z1 Setpoint reached (Error -0.5). Reverting to Base Delta T (3.0).
[12:18:35] [D][auto_adaptive:300]: Z1 HEATING (boost adjustment): boost: 1.0°C, calcluated_flow: 45.50°C, actual_flow: 48.00°C
[12:18:35] [D][auto_adaptive:312]: Z1 HEATING (Delta T): calculated_flow: 46.50°C (boost: 1.0)
[12:18:35] [W][auto_adaptive:145]: Flow adjust: 47.50°C to prevent compressor stop! (setpoint: 46.50°C is 1.50°C below actual feed temp)
[12:18:35] [W][auto_adaptive:059]: Flow limited to 47.0°C (Zone Max Limit), calculated_flow: 47.5
[12:20:48] [W][short_cycle:078]: Short-cycle predicted! Increasing Feed temps to force a longer cycle. Current saved Z1 setpoin: 44.0°
[12:20:48] [W][auto_adaptive:059]: Flow limited to 47.0°C (Zone Max Limit), calculated_flow: 48.5
[12:20:48] [D][short_cycle:090]: (Delta T) CMD: Increase Z1 Heat Flow to -> 47.0°C
[12:21:18] [D][short_cycle:074]: Zone: 1: High Delta T detected (1.5°C). Starting timer.
[12:23:35] [D][auto_adaptive:431]: [*] Starting auto-adaptive cycle, z2 independent: 1, has_cooling: 1, cold factor: 1.50, min delta T: 3.00, max delta T: 8.00
[12:23:35] [D][auto_adaptive:218]: Processing Zone 1: climate source: 0, Room=23.0, Target=22.5, Actual Feedtemp: 48.5, Return temp: 43.0, Outside: -7.0, Bias: 0.0, heating: 1, cooling: 0
[12:23:35] [D][auto_adaptive:238]: Effective delta T: 6.00, cold factor: 1.50, dynamic min delta T: 6.00, error factor: 0.00, smart boost: 1.00, linear profile: 1
[12:23:35] [D][auto_adaptive:289]: Z1 Setpoint reached (Error -0.5). Reverting to Base Delta T (3.0).
[12:23:35] [D][auto_adaptive:300]: Z1 HEATING (boost adjustment): boost: 1.5°C, calcluated_flow: 46.00°C, actual_flow: 48.50°C
[12:23:35] [D][auto_adaptive:312]: Z1 HEATING (Delta T): calculated_flow: 47.50°C (boost: 1.5)
[12:23:35] [W][auto_adaptive:059]: Flow limited to 47.0°C (Zone Max Limit), calculated_flow: 47.5
[12:25:07] [I][short_cycle:244]: Compressor STOP detected
[12:25:07] [D][short_cycle:158]: Compressor stop event: stand-alone-cycle prevention: 0, saved z1 flow setpoint: 44.0, saved z2 flow setpoint: nan
[12:28:35] [D][auto_adaptive:362]: System is busy (DHW, Defrost, or Lockout). Exiting.
[12:33:34] [D][auto_adaptive:362]: System is busy (DHW, Defrost, or Lockout). Exiting.
[12:34:13] [D][auto_adaptive:223]: Operation Mode Changed to heating: 5 -> 2
[12:34:13] [D][auto_adaptive:431]: [*] Starting auto-adaptive cycle, z2 independent: 1, has_cooling: 1, cold factor: 1.50, min delta T: 3.00, max delta T: 8.00
[12:34:13] [D][auto_adaptive:218]: Processing Zone 1: climate source: 0, Room=23.0, Target=22.5, Actual Feedtemp: 47.0, Return temp: 43.5, Outside: -6.0, Bias: 0.0, heating: 1, cooling: 0
[12:34:13] [D][auto_adaptive:238]: Effective delta T: 6.00, cold factor: 1.50, dynamic min delta T: 6.00, error factor: 0.00, smart boost: 1.00, linear profile: 1
[12:34:13] [D][auto_adaptive:289]: Z1 Setpoint reached (Error -0.5). Reverting to Base Delta T (3.0).
[12:34:13] [D][auto_adaptive:300]: Z1 HEATING (boost adjustment): boost: 1.5°C, calcluated_flow: 46.50°C, actual_flow: 47.00°C
[12:34:13] [D][auto_adaptive:312]: Z1 HEATING (Delta T): calculated_flow: 46.50°C (boost: 0.0)
[12:34:13] [D][auto_adaptive:092]: CMD: Set Z1 Heat Flow -> 46.5°C (47.0°C)
[12:37:47] [I][short_cycle:252]: Compressor START detected
[12:37:47] [D][auto_adaptive:258]: Compressor start: triggering auto-adaptive loop.
[12:37:47] [D][auto_adaptive:431]: [*] Starting auto-adaptive cycle, z2 independent: 1, has_cooling: 1, cold factor: 1.50, min delta T: 3.00, max delta T: 8.00
[12:37:47] [D][auto_adaptive:218]: Processing Zone 1: climate source: 0, Room=23.0, Target=22.5, Actual Feedtemp: 45.0, Return temp: 43.0, Outside: -6.0, Bias: 0.0, heating: 1, cooling: 0
[12:37:47] [D][auto_adaptive:238]: Effective delta T: 6.00, cold factor: 1.50, dynamic min delta T: 6.00, error factor: 0.00, smart boost: 1.00, linear profile: 1
[12:37:47] [D][auto_adaptive:289]: Z1 Setpoint reached (Error -0.5). Reverting to Base Delta T (3.0).
[12:37:47] [D][auto_adaptive:312]: Z1 HEATING (Delta T): calculated_flow: 46.00°C (boost: 0.0)
[12:37:47] [D][auto_adaptive:092]: CMD: Set Z1 Heat Flow -> 46.0°C (46.5°C)
[12:38:33] [D][auto_adaptive:431]: [*] Starting auto-adaptive cycle, z2 independent: 1, has_cooling: 1, cold factor: 1.50, min delta T: 3.00, max delta T: 8.00
[12:38:33] [D][auto_adaptive:218]: Processing Zone 1: climate source: 0, Room=23.0, Target=22.5, Actual Feedtemp: 45.0, Return temp: 42.5, Outside: -6.0, Bias: 0.0, heating: 1, cooling: 0
[12:38:33] [D][auto_adaptive:238]: Effective delta T: 6.00, cold factor: 1.50, dynamic min delta T: 6.00, error factor: 0.00, smart boost: 1.00, linear profile: 1
[12:38:33] [D][auto_adaptive:289]: Z1 Setpoint reached (Error -0.5). Reverting to Base Delta T (3.0).
[12:38:33] [D][auto_adaptive:312]: Z1 HEATING (Delta T): calculated_flow: 45.50°C (boost: 0.0)
[12:38:33] [D][auto_adaptive:092]: CMD: Set Z1 Heat Flow -> 45.5°C (46.0°C)
[12:43:33] [D][auto_adaptive:431]: [*] Starting auto-adaptive cycle, z2 independent: 1, has_cooling: 1, cold factor: 1.50, min delta T: 3.00, max delta T: 8.00
[12:43:33] [D][auto_adaptive:218]: Processing Zone 1: climate source: 0, Room=23.0, Target=22.5, Actual Feedtemp: 44.5, Return temp: 41.0, Outside: -6.0, Bias: 0.0, heating: 1, cooling: 0
[12:43:33] [D][auto_adaptive:238]: Effective delta T: 6.00, cold factor: 1.50, dynamic min delta T: 6.00, error factor: 0.00, smart boost: 1.00, linear profile: 1
[12:43:33] [D][auto_adaptive:289]: Z1 Setpoint reached (Error -0.5). Reverting to Base Delta T (3.0).
[12:43:33] [D][auto_adaptive:312]: Z1 HEATING (Delta T): calculated_flow: 44.00°C (boost: 0.0)
[12:43:33] [D][auto_adaptive:092]: CMD: Set Z1 Heat Flow -> 44.0°C (45.5°C)
[12:43:34] [W][ecodan.component:352]: Command timed out. Retrying (attempt 2/30)...[1]
[12:44:46] [D][short_cycle:074]: Zone: 1: High Delta T detected (1.0°C). Starting timer.
[12:48:33] [D][auto_adaptive:431]: [*] Starting auto-adaptive cycle, z2 independent: 1, has_cooling: 1, cold factor: 1.50, min delta T: 3.00, max delta T: 8.00
[12:48:33] [D][auto_adaptive:218]: Processing Zone 1: climate source: 0, Room=23.0, Target=22.5, Actual Feedtemp: 45.0, Return temp: 40.5, Outside: -6.0, Bias: 0.0, heating: 1, cooling: 0
[12:48:33] [D][auto_adaptive:238]: Effective delta T: 6.00, cold factor: 1.50, dynamic min delta T: 6.00, error factor: 0.00, smart boost: 1.00, linear profile: 1
[12:48:33] [D][auto_adaptive:289]: Z1 Setpoint reached (Error -0.5). Reverting to Base Delta T (3.0).
[12:48:33] [D][auto_adaptive:312]: Z1 HEATING (Delta T): calculated_flow: 43.50°C (boost: 0.0)
[12:48:33] [W][auto_adaptive:145]: Flow adjust: 44.50°C to prevent compressor stop! (setpoint: 43.50°C is 1.50°C below actual feed temp)
[12:48:33] [D][auto_adaptive:092]: CMD: Set Z1 Heat Flow -> 44.5°C (44.0°C)
[12:48:46] [W][short_cycle:078]: Short-cycle predicted! Increasing Feed temps to force a longer cycle. Current saved Z1 setpoin: 44.0°
[12:48:46] [D][short_cycle:090]: (Delta T) CMD: Increase Z1 Heat Flow to -> 44.5°C
[12:49:16] [D][short_cycle:074]: Zone: 1: High Delta T detected (1.0°C). Starting timer.
[12:53:16] [W][short_cycle:078]: Short-cycle predicted! Increasing Feed temps to force a longer cycle. Current saved Z1 setpoin: 44.0°
[12:53:16] [D][short_cycle:090]: (Delta T) CMD: Increase Z1 Heat Flow to -> 45.5°C
[12:53:33] [D][auto_adaptive:431]: [*] Starting auto-adaptive cycle, z2 independent: 1, has_cooling: 1, cold factor: 1.50, min delta T: 3.00, max delta T: 8.00
[12:53:33] [D][auto_adaptive:218]: Processing Zone 1: climate source: 0, Room=23.0, Target=22.5, Actual Feedtemp: 45.5, Return temp: 40.5, Outside: -6.0, Bias: 0.0, heating: 1, cooling: 0
[12:53:33] [D][auto_adaptive:238]: Effective delta T: 6.00, cold factor: 1.50, dynamic min delta T: 6.00, error factor: 0.00, smart boost: 1.00, linear profile: 1
[12:53:33] [D][auto_adaptive:289]: Z1 Setpoint reached (Error -0.5). Reverting to Base Delta T (3.0).
[12:53:33] [D][auto_adaptive:300]: Z1 HEATING (boost adjustment): boost: 1.0°C, calcluated_flow: 43.50°C, actual_flow: 45.50°C
[12:53:33] [D][auto_adaptive:312]: Z1 HEATING (Delta T): calculated_flow: 44.50°C (boost: 1.0)
[12:53:33] [D][auto_adaptive:092]: CMD: Set Z1 Heat Flow -> 44.5°C (45.5°C)
[12:54:16] [D][short_cycle:074]: Zone: 1: High Delta T detected (1.0°C). Starting timer.
[12:58:16] [W][short_cycle:078]: Short-cycle predicted! Increasing Feed temps to force a longer cycle. Current saved Z1 setpoin: 44.0°
[12:58:16] [D][short_cycle:090]: (Delta T) CMD: Increase Z1 Heat Flow to -> 46.0°C
[12:58:17] [W][ecodan.component:352]: Command timed out. Retrying (attempt 2/30)...[1]
[12:58:33] [D][auto_adaptive:431]: [*] Starting auto-adaptive cycle, z2 independent: 1, has_cooling: 1, cold factor: 1.50, min delta T: 3.00, max delta T: 8.00
[12:58:33] [D][auto_adaptive:218]: Processing Zone 1: climate source: 0, Room=23.0, Target=22.5, Actual Feedtemp: 46.0, Return temp: 40.5, Outside: -6.0, Bias: 0.0, heating: 1, cooling: 0
[12:58:33] [D][auto_adaptive:238]: Effective delta T: 6.00, cold factor: 1.50, dynamic min delta T: 6.00, error factor: 0.00, smart boost: 1.00, linear profile: 1
[12:58:33] [D][auto_adaptive:289]: Z1 Setpoint reached (Error -0.5). Reverting to Base Delta T (3.0).
[12:58:33] [D][auto_adaptive:300]: Z1 HEATING (boost adjustment): boost: 1.5°C, calcluated_flow: 43.50°C, actual_flow: 46.00°C
[12:58:33] [D][auto_adaptive:312]: Z1 HEATING (Delta T): calculated_flow: 45.00°C (boost: 1.5)
[12:58:33] [D][auto_adaptive:092]: CMD: Set Z1 Heat Flow -> 45.0°C (46.0°C)
[12:59:16] [D][short_cycle:074]: Zone: 1: High Delta T detected (1.0°C). Starting timer.
[13:03:16] [W][short_cycle:078]: Short-cycle predicted! Increasing Feed temps to force a longer cycle. Current saved Z1 setpoin: 44.0°
[13:03:16] [D][short_cycle:090]: (Delta T) CMD: Increase Z1 Heat Flow to -> 47.0°C
[13:03:33] [D][auto_adaptive:431]: [*] Starting auto-adaptive cycle, z2 independent: 1, has_cooling: 1, cold factor: 1.50, min delta T: 3.00, max delta T: 8.00
[13:03:33] [D][auto_adaptive:218]: Processing Zone 1: climate source: 0, Room=23.0, Target=22.5, Actual Feedtemp: 46.0, Return temp: 41.0, Outside: -6.0, Bias: 0.0, heating: 1, cooling: 0
[13:03:33] [D][auto_adaptive:238]: Effective delta T: 6.00, cold factor: 1.50, dynamic min delta T: 6.00, error factor: 0.00, smart boost: 1.00, linear profile: 1
[13:03:33] [D][auto_adaptive:289]: Z1 Setpoint reached (Error -0.5). Reverting to Base Delta T (3.0).
[13:03:33] [D][auto_adaptive:300]: Z1 HEATING (boost adjustment): boost: 2.0°C, calcluated_flow: 44.00°C, actual_flow: 46.00°C
[13:03:33] [D][auto_adaptive:312]: Z1 HEATING (Delta T): calculated_flow: 46.00°C (boost: 2.0)
[13:03:33] [D][auto_adaptive:092]: CMD: Set Z1 Heat Flow -> 46.0°C (47.0°C)
[13:08:33] [D][auto_adaptive:431]: [*] Starting auto-adaptive cycle, z2 independent: 1, has_cooling: 1, cold factor: 1.50, min delta T: 3.00, max delta T: 8.00
[13:08:33] [D][auto_adaptive:218]: Processing Zone 1: climate source: 0, Room=23.0, Target=22.5, Actual Feedtemp: 46.5, Return temp: 41.0, Outside: -6.0, Bias: 0.0, heating: 1, cooling: 0
[13:08:33] [D][auto_adaptive:238]: Effective delta T: 6.00, cold factor: 1.50, dynamic min delta T: 6.00, error factor: 0.00, smart boost: 1.00, linear profile: 1
[13:08:33] [D][auto_adaptive:289]: Z1 Setpoint reached (Error -0.5). Reverting to Base Delta T (3.0).
[13:08:33] [D][auto_adaptive:300]: Z1 HEATING (boost adjustment): boost: 2.0°C, calcluated_flow: 44.00°C, actual_flow: 46.50°C
[13:08:33] [D][auto_adaptive:312]: Z1 HEATING (Delta T): calculated_flow: 46.00°C (boost: 2.0)
[13:13:16] [D][short_cycle:074]: Zone: 1: High Delta T detected (1.0°C). Starting timer.
[13:13:33] [D][auto_adaptive:431]: [*] Starting auto-adaptive cycle, z2 independent: 1, has_cooling: 1, cold factor: 1.50, min delta T: 3.00, max delta T: 8.00
[13:13:33] [D][auto_adaptive:218]: Processing Zone 1: climate source: 0, Room=23.0, Target=22.5, Actual Feedtemp: 46.5, Return temp: 41.5, Outside: -6.0, Bias: 0.0, heating: 1, cooling: 0
[13:13:33] [D][auto_adaptive:238]: Effective delta T: 6.00, cold factor: 1.50, dynamic min delta T: 6.00, error factor: 0.00, smart boost: 1.00, linear profile: 1
[13:13:33] [D][auto_adaptive:289]: Z1 Setpoint reached (Error -0.5). Reverting to Base Delta T (3.0).
[13:13:33] [D][auto_adaptive:300]: Z1 HEATING (boost adjustment): boost: 2.0°C, calcluated_flow: 44.50°C, actual_flow: 46.50°C
[13:13:33] [D][auto_adaptive:312]: Z1 HEATING (Delta T): calculated_flow: 46.50°C (boost: 2.0)
[13:13:33] [D][auto_adaptive:092]: CMD: Set Z1 Heat Flow -> 46.5°C (46.0°C)
[13:13:34] [W][ecodan.component:352]: Command timed out. Retrying (attempt 2/30)...[1]
[13:13:46] [D][short_cycle:098]: Zone: 1: High Delta T has disappeared. Resetting timer.
[13:18:30] [E][http_request.idf:186][update_task]: esp_http_client_open failed: ESP_ERR_HTTP_CONNECT
[13:18:30] [E][component:419][update_task]: http_request set Error flag: unspecified
[13:18:30] [E][http_request.update:061][update_task]: Failed to fetch manifest from https://github.com/gekkekoe/esphome-ecodan-hp/releases/latest/download/manifest-esp32s3-z1-en.json
[13:18:31] [E][component:436]: http_request cleared Error flag
[13:18:33] [D][auto_adaptive:431]: [*] Starting auto-adaptive cycle, z2 independent: 1, has_cooling: 1, cold factor: 1.50, min delta T: 3.00, max delta T: 8.00
[13:18:33] [D][auto_adaptive:218]: Processing Zone 1: climate source: 0, Room=23.0, Target=22.5, Actual Feedtemp: 47.0, Return temp: 41.5, Outside: -6.0, Bias: 0.0, heating: 1, cooling: 0
[13:18:33] [D][auto_adaptive:238]: Effective delta T: 6.00, cold factor: 1.50, dynamic min delta T: 6.00, error factor: 0.00, smart boost: 1.00, linear profile: 1
[13:18:33] [D][auto_adaptive:289]: Z1 Setpoint reached (Error -0.5). Reverting to Base Delta T (3.0).
[13:18:33] [D][auto_adaptive:300]: Z1 HEATING (boost adjustment): boost: 2.0°C, calcluated_flow: 44.50°C, actual_flow: 47.00°C
[13:18:33] [D][auto_adaptive:312]: Z1 HEATING (Delta T): calculated_flow: 46.50°C (boost: 2.0)
[13:23:23] [I][short_cycle:244]: Compressor STOP detected
[13:23:23] [D][short_cycle:158]: Compressor stop event: stand-alone-cycle prevention: 0, saved z1 flow setpoint: 44.0, saved z2 flow setpoint: nan
[13:23:33] [D][auto_adaptive:362]: System is busy (DHW, Defrost, or Lockout). Exiting.
[13:25:17] [D][auto_adaptive:258]: Compressor start: triggering auto-adaptive loop.
[13:25:17] [D][auto_adaptive:362]: System is busy (DHW, Defrost, or Lockout). Exiting.
[13:25:29] [D][auto_adaptive:232]: Defrost stop: triggering auto-adaptive loop.
[13:25:29] [D][auto_adaptive:431]: [*] Starting auto-adaptive cycle, z2 independent: 1, has_cooling: 1, cold factor: 0.54, min delta T: 3.00, max delta T: 8.00
[13:25:29] [D][auto_adaptive:218]: Processing Zone 1: climate source: 0, Room=23.0, Target=22.5, Actual Feedtemp: 47.0, Return temp: 42.0, Outside: 3.0, Bias: 0.0, heating: 1, cooling: 0
[13:25:29] [D][auto_adaptive:238]: Effective delta T: 4.08, cold factor: 0.54, dynamic min delta T: 4.08, error factor: 0.00, smart boost: 1.00, linear profile: 1
[13:25:29] [D][auto_adaptive:265]: Defrost logic: enabled=1, active=0, time_since=11653757 ms
[13:25:29] [D][auto_adaptive:289]: Z1 Setpoint reached (Error -0.5). Reverting to Base Delta T (3.0).
[13:25:29] [D][auto_adaptive:300]: Z1 HEATING (boost adjustment): boost: 2.0°C, calcluated_flow: 45.00°C, actual_flow: 47.00°C
[13:25:29] [D][auto_adaptive:312]: Z1 HEATING (Delta T): calculated_flow: 47.00°C (boost: 2.0)
[13:25:29] [D][auto_adaptive:092]: CMD: Set Z1 Heat Flow -> 47.0°C (46.5°C)
[13:25:46] [D][short_cycle:119]: Defrost cycle finished. Updating last_defrost timestamp
[13:28:33] [D][auto_adaptive:431]: [*] Starting auto-adaptive cycle, z2 independent: 1, has_cooling: 1, cold factor: 1.50, min delta T: 3.00, max delta T: 8.00
[13:28:33] [D][auto_adaptive:218]: Processing Zone 1: climate source: 0, Room=23.0, Target=22.5, Actual Feedtemp: 45.5, Return temp: 42.0, Outside: -5.0, Bias: 0.0, heating: 1, cooling: 0
[13:28:33] [D][auto_adaptive:238]: Effective delta T: 6.00, cold factor: 1.50, dynamic min delta T: 6.00, error factor: 0.00, smart boost: 1.00, linear profile: 1
[13:28:33] [D][auto_adaptive:289]: Z1 Setpoint reached (Error -0.5). Reverting to Base Delta T (3.0).
[13:28:33] [D][auto_adaptive:300]: Z1 HEATING (boost adjustment): boost: 2.0°C, calcluated_flow: 45.00°C, actual_flow: 45.50°C
[13:28:33] [D][auto_adaptive:312]: Z1 HEATING (Delta T): calculated_flow: 45.00°C (boost: 0.0)
[13:28:33] [D][auto_adaptive:092]: CMD: Set Z1 Heat Flow -> 45.0°C (47.0°C)
[13:33:33] [D][auto_adaptive:431]: [*] Starting auto-adaptive cycle, z2 independent: 1, has_cooling: 1, cold factor: 1.50, min delta T: 3.00, max delta T: 8.00
[13:33:33] [D][auto_adaptive:218]: Processing Zone 1: climate source: 0, Room=23.0, Target=22.5, Actual Feedtemp: 43.5, Return temp: 40.5, Outside: -5.0, Bias: 0.0, heating: 1, cooling: 0
[13:33:33] [D][auto_adaptive:238]: Effective delta T: 6.00, cold factor: 1.50, dynamic min delta T: 6.00, error factor: 0.00, smart boost: 1.00, linear profile: 1
[13:33:33] [D][auto_adaptive:289]: Z1 Setpoint reached (Error -0.5). Reverting to Base Delta T (3.0).
[13:33:33] [D][auto_adaptive:312]: Z1 HEATING (Delta T): calculated_flow: 43.50°C (boost: 0.0)
[13:33:33] [D][auto_adaptive:092]: CMD: Set Z1 Heat Flow -> 43.5°C (45.0°C)
[13:33:34] [W][ecodan.component:352]: Command timed out. Retrying (attempt 2/30)...[1]
[13:38:33] [D][auto_adaptive:431]: [*] Starting auto-adaptive cycle, z2 independent: 1, has_cooling: 1, cold factor: 1.50, min delta T: 3.00, max delta T: 8.00
[13:38:33] [D][auto_adaptive:218]: Processing Zone 1: climate source: 0, Room=23.0, Target=22.5, Actual Feedtemp: 44.0, Return temp: 39.5, Outside: -5.0, Bias: 0.0, heating: 1, cooling: 0
[13:38:33] [D][auto_adaptive:238]: Effective delta T: 6.00, cold factor: 1.50, dynamic min delta T: 6.00, error factor: 0.00, smart boost: 1.00, linear profile: 1
[13:38:33] [D][auto_adaptive:289]: Z1 Setpoint reached (Error -0.5). Reverting to Base Delta T (3.0).
[13:38:33] [D][auto_adaptive:312]: Z1 HEATING (Delta T): calculated_flow: 42.50°C (boost: 0.0)
[13:38:33] [W][auto_adaptive:145]: Flow adjust: 43.50°C to prevent compressor stop! (setpoint: 42.50°C is 1.50°C below actual feed temp)
[13:39:16] [D][short_cycle:074]: Zone: 1: High Delta T detected (1.0°C). Starting timer.
[13:43:16] [W][short_cycle:078]: Short-cycle predicted! Increasing Feed temps to force a longer cycle. Current saved Z1 setpoin: 44.0°
[13:43:16] [D][short_cycle:090]: (Delta T) CMD: Increase Z1 Heat Flow to -> 44.0°C
[13:43:33] [D][auto_adaptive:431]: [*] Starting auto-adaptive cycle, z2 independent: 1, has_cooling: 1, cold factor: 1.50, min delta T: 3.00, max delta T: 8.00
[13:43:33] [D][auto_adaptive:218]: Processing Zone 1: climate source: 0, Room=23.0, Target=22.5, Actual Feedtemp: 45.0, Return temp: 40.0, Outside: -5.0, Bias: 0.0, heating: 1, cooling: 0
[13:43:33] [D][auto_adaptive:238]: Effective delta T: 6.00, cold factor: 1.50, dynamic min delta T: 6.00, error factor: 0.00, smart boost: 1.00, linear profile: 1
[13:43:33] [D][auto_adaptive:289]: Z1 Setpoint reached (Error -0.5). Reverting to Base Delta T (3.0).
[13:43:33] [D][auto_adaptive:300]: Z1 HEATING (boost adjustment): boost: 0.5°C, calcluated_flow: 43.00°C, actual_flow: 45.00°C
[13:43:33] [D][auto_adaptive:312]: Z1 HEATING (Delta T): calculated_flow: 43.50°C (boost: 0.5)
[13:43:33] [W][auto_adaptive:145]: Flow adjust: 44.50°C to prevent compressor stop! (setpoint: 43.50°C is 1.50°C below actual feed temp)
[13:43:33] [D][auto_adaptive:092]: CMD: Set Z1 Heat Flow -> 44.5°C (44.0°C)
[13:43:46] [D][short_cycle:074]: Zone: 1: High Delta T detected (1.0°C). Starting timer.
[13:44:16] [D][short_cycle:098]: Zone: 1: High Delta T has disappeared. Resetting timer.
[13:47:46] [D][short_cycle:074]: Zone: 1: High Delta T detected (1.0°C). Starting timer.
[13:48:33] [D][auto_adaptive:431]: [*] Starting auto-adaptive cycle, z2 independent: 1, has_cooling: 1, cold factor: 1.50, min delta T: 3.00, max delta T: 8.00
[13:48:33] [D][auto_adaptive:218]: Processing Zone 1: climate source: 0, Room=23.0, Target=22.5, Actual Feedtemp: 45.5, Return temp: 40.0, Outside: -5.0, Bias: 0.0, heating: 1, cooling: 0
[13:48:33] [D][auto_adaptive:238]: Effective delta T: 6.00, cold factor: 1.50, dynamic min delta T: 6.00, error factor: 0.00, smart boost: 1.00, linear profile: 1
[13:48:33] [D][auto_adaptive:289]: Z1 Setpoint reached (Error -0.5). Reverting to Base Delta T (3.0).
[13:48:33] [D][auto_adaptive:300]: Z1 HEATING (boost adjustment): boost: 0.5°C, calcluated_flow: 43.00°C, actual_flow: 45.50°C
[13:48:33] [D][auto_adaptive:312]: Z1 HEATING (Delta T): calculated_flow: 43.50°C (boost: 0.5)
[13:48:33] [W][auto_adaptive:145]: Flow adjust: 45.00°C to prevent compressor stop! (setpoint: 43.50°C is 2.00°C below actual feed temp)
[13:48:33] [D][auto_adaptive:092]: CMD: Set Z1 Heat Flow -> 45.0°C (44.5°C)
[13:48:46] [D][short_cycle:098]: Zone: 1: High Delta T has disappeared. Resetting timer.
[13:51:46] [D][short_cycle:074]: Zone: 1: High Delta T detected (1.0°C). Starting timer.
[13:53:33] [D][auto_adaptive:431]: [*] Starting auto-adaptive cycle, z2 independent: 1, has_cooling: 1, cold factor: 1.50, min delta T: 3.00, max delta T: 8.00
[13:53:33] [D][auto_adaptive:218]: Processing Zone 1: climate source: 0, Room=23.0, Target=22.5, Actual Feedtemp: 46.0, Return temp: 40.5, Outside: -5.0, Bias: 0.0, heating: 1, cooling: 0
[13:53:33] [D][auto_adaptive:238]: Effective delta T: 6.00, cold factor: 1.50, dynamic min delta T: 6.00, error factor: 0.00, smart boost: 1.00, linear profile: 1
[13:53:33] [D][auto_adaptive:289]: Z1 Setpoint reached (Error -0.5). Reverting to Base Delta T (3.0).
[13:53:33] [D][auto_adaptive:300]: Z1 HEATING (boost adjustment): boost: 0.5°C, calcluated_flow: 43.50°C, actual_flow: 46.00°C
[13:53:33] [D][auto_adaptive:312]: Z1 HEATING (Delta T): calculated_flow: 44.00°C (boost: 0.5)
[13:53:33] [W][auto_adaptive:145]: Flow adjust: 45.50°C to prevent compressor stop! (setpoint: 44.00°C is 2.00°C below actual feed temp)
[13:53:33] [D][auto_adaptive:092]: CMD: Set Z1 Heat Flow -> 45.5°C (45.0°C)
[13:53:34] [W][ecodan.component:352]: Command timed out. Retrying (attempt 2/30)...[1]
[13:53:46] [D][short_cycle:098]: Zone: 1: High Delta T has disappeared. Resetting timer.
[13:57:46] [D][short_cycle:074]: Zone: 1: High Delta T detected (1.0°C). Starting timer.
[13:58:16] [D][short_cycle:098]: Zone: 1: High Delta T has disappeared. Resetting timer.
[13:58:33] [D][auto_adaptive:431]: [*] Starting auto-adaptive cycle, z2 independent: 1, has_cooling: 1, cold factor: 1.50, min delta T: 3.00, max delta T: 8.00
[13:58:33] [D][auto_adaptive:218]: Processing Zone 1: climate source: 0, Room=23.0, Target=22.5, Actual Feedtemp: 46.5, Return temp: 41.0, Outside: -5.0, Bias: 0.0, heating: 1, cooling: 0
[13:58:33] [D][auto_adaptive:238]: Effective delta T: 6.00, cold factor: 1.50, dynamic min delta T: 6.00, error factor: 0.00, smart boost: 1.00, linear profile: 1
[13:58:33] [D][auto_adaptive:289]: Z1 Setpoint reached (Error -0.5). Reverting to Base Delta T (3.0).
[13:58:33] [D][auto_adaptive:300]: Z1 HEATING (boost adjustment): boost: 0.5°C, calcluated_flow: 44.00°C, actual_flow: 46.50°C
[13:58:33] [D][auto_adaptive:312]: Z1 HEATING (Delta T): calculated_flow: 44.50°C (boost: 0.5)
[13:58:33] [W][auto_adaptive:145]: Flow adjust: 46.00°C to prevent compressor stop! (setpoint: 44.50°C is 2.00°C below actual feed temp)
[13:58:33] [D][auto_adaptive:092]: CMD: Set Z1 Heat Flow -> 46.0°C (45.5°C)
[14:01:29] [D][auto_adaptive:218]: Switching to DHW. Saved heating setpoints: Z1=46.0, Z2=0.0
[14:03:33] [D][auto_adaptive:362]: System is busy (DHW, Defrost, or Lockout). Exiting.
[14:08:33] [D][auto_adaptive:362]: System is busy (DHW, Defrost, or Lockout). Exiting.
[14:13:33] [D][auto_adaptive:362]: System is busy (DHW, Defrost, or Lockout). Exiting.
[14:18:33] [D][auto_adaptive:362]: System is busy (DHW, Defrost, or Lockout). Exiting.
[14:23:33] [D][auto_adaptive:362]: System is busy (DHW, Defrost, or Lockout). Exiting.
[14:28:33] [D][auto_adaptive:362]: System is busy (DHW, Defrost, or Lockout). Exiting.
[14:33:33] [D][auto_adaptive:362]: System is busy (DHW, Defrost, or Lockout). Exiting.
[14:38:33] [D][auto_adaptive:362]: System is busy (DHW, Defrost, or Lockout). Exiting.
[14:41:28] [D][auto_adaptive:223]: Operation Mode Changed to heating: 1 -> 2
[14:41:28] [D][auto_adaptive:431]: [*] Starting auto-adaptive cycle, z2 independent: 1, has_cooling: 1, cold factor: 1.35, min delta T: 3.00, max delta T: 8.00
[14:41:28] [D][auto_adaptive:218]: Processing Zone 1: climate source: 0, Room=23.0, Target=22.5, Actual Feedtemp: 41.5, Return temp: 38.0, Outside: -4.0, Bias: 0.0, heating: 1, cooling: 0
[14:41:28] [D][auto_adaptive:238]: Effective delta T: 5.71, cold factor: 1.35, dynamic min delta T: 5.71, error factor: 0.00, smart boost: 1.00, linear profile: 1
[14:41:28] [D][auto_adaptive:289]: Z1 Setpoint reached (Error -0.5). Reverting to Base Delta T (3.0).
[14:41:28] [D][auto_adaptive:300]: Z1 HEATING (boost adjustment): boost: 0.5°C, calcluated_flow: 41.00°C, actual_flow: 41.50°C
[14:41:28] [D][auto_adaptive:312]: Z1 HEATING (Delta T): calculated_flow: 41.00°C (boost: 0.0)
[14:41:28] [D][auto_adaptive:092]: CMD: Set Z1 Heat Flow -> 41.0°C (46.0°C)
[14:41:46] [D][short_cycle:074]: Zone: 1: High Delta T detected (2.0°C). Starting timer.
[14:41:58] [I][short_cycle:244]: Compressor STOP detected
[14:41:58] [D][short_cycle:158]: Compressor stop event: stand-alone-cycle prevention: 0, saved z1 flow setpoint: 44.0, saved z2 flow setpoint: nan
[14:43:33] [D][auto_adaptive:362]: System is busy (DHW, Defrost, or Lockout). Exiting.
[14:48:33] [D][auto_adaptive:362]: System is busy (DHW, Defrost, or Lockout). Exiting.
[14:52:04] [D][auto_adaptive:223]: Operation Mode Changed to heating: 5 -> 2
[14:52:04] [D][auto_adaptive:431]: [*] Starting auto-adaptive cycle, z2 independent: 1, has_cooling: 1, cold factor: 1.21, min delta T: 3.00, max delta T: 8.00
[14:52:04] [D][auto_adaptive:218]: Processing Zone 1: climate source: 0, Room=23.0, Target=22.5, Actual Feedtemp: 41.5, Return temp: 39.5, Outside: -3.0, Bias: 0.0, heating: 1, cooling: 0
[14:52:04] [D][auto_adaptive:238]: Effective delta T: 5.43, cold factor: 1.21, dynamic min delta T: 5.43, error factor: 0.00, smart boost: 1.00, linear profile: 1
[14:52:04] [D][auto_adaptive:289]: Z1 Setpoint reached (Error -0.5). Reverting to Base Delta T (3.0).
[14:52:04] [D][auto_adaptive:312]: Z1 HEATING (Delta T): calculated_flow: 42.50°C (boost: 0.0)
[14:52:04] [D][auto_adaptive:092]: CMD: Set Z1 Heat Flow -> 42.5°C (41.0°C)
[14:53:33] [D][auto_adaptive:431]: [*] Starting auto-adaptive cycle, z2 independent: 1, has_cooling: 1, cold factor: 1.21, min delta T: 3.00, max delta T: 8.00
[14:53:33] [D][auto_adaptive:218]: Processing Zone 1: climate source: 0, Room=23.0, Target=22.5, Actual Feedtemp: 38.0, Return temp: 39.5, Outside: -3.0, Bias: 0.0, heating: 1, cooling: 0
[14:53:33] [D][auto_adaptive:238]: Effective delta T: 5.43, cold factor: 1.21, dynamic min delta T: 5.43, error factor: 0.00, smart boost: 1.00, linear profile: 1
[14:53:33] [D][auto_adaptive:289]: Z1 Setpoint reached (Error -0.5). Reverting to Base Delta T (3.0).
[14:53:33] [D][auto_adaptive:312]: Z1 HEATING (Delta T): calculated_flow: 42.50°C (boost: 0.0)
[14:55:41] [I][short_cycle:252]: Compressor START detected
[14:55:41] [D][auto_adaptive:258]: Compressor start: triggering auto-adaptive loop.
[14:55:41] [D][auto_adaptive:431]: [*] Starting auto-adaptive cycle, z2 independent: 1, has_cooling: 1, cold factor: 1.21, min delta T: 3.00, max delta T: 8.00
[14:55:41] [D][auto_adaptive:218]: Processing Zone 1: climate source: 0, Room=22.5, Target=22.5, Actual Feedtemp: 37.0, Return temp: 38.0, Outside: -3.0, Bias: 0.0, heating: 1, cooling: 0
[14:55:41] [D][auto_adaptive:238]: Effective delta T: 5.43, cold factor: 1.21, dynamic min delta T: 5.43, error factor: 0.00, smart boost: 1.00, linear profile: 1
[14:55:41] [D][auto_adaptive:312]: Z1 HEATING (Delta T): calculated_flow: 43.40°C (boost: 0.0)
[14:55:41] [D][auto_adaptive:092]: CMD: Set Z1 Heat Flow -> 43.4°C (42.5°C)
[14:58:33] [D][auto_adaptive:431]: [*] Starting auto-adaptive cycle, z2 independent: 1, has_cooling: 1, cold factor: 1.35, min delta T: 3.00, max delta T: 8.00
[14:58:33] [D][auto_adaptive:218]: Processing Zone 1: climate source: 0, Room=22.5, Target=22.5, Actual Feedtemp: 38.0, Return temp: 36.5, Outside: -4.0, Bias: 0.0, heating: 1, cooling: 0
[14:58:33] [D][auto_adaptive:238]: Effective delta T: 5.71, cold factor: 1.35, dynamic min delta T: 5.71, error factor: 0.00, smart boost: 1.00, linear profile: 1
[14:58:33] [D][auto_adaptive:312]: Z1 HEATING (Delta T): calculated_flow: 42.20°C (boost: 0.0)
[14:58:33] [D][auto_adaptive:092]: CMD: Set Z1 Heat Flow -> 42.2°C (43.4°C)
[14:58:34] [W][ecodan.component:352]: Command timed out. Retrying (attempt 2/30)...[1]
[15:03:33] [D][auto_adaptive:431]: [*] Starting auto-adaptive cycle, z2 independent: 1, has_cooling: 1, cold factor: 1.35, min delta T: 3.00, max delta T: 8.00
[15:03:33] [D][auto_adaptive:218]: Processing Zone 1: climate source: 0, Room=22.5, Target=22.5, Actual Feedtemp: 40.5, Return temp: 36.0, Outside: -4.0, Bias: 0.0, heating: 1, cooling: 0
[15:03:33] [D][auto_adaptive:238]: Effective delta T: 5.71, cold factor: 1.35, dynamic min delta T: 5.71, error factor: 0.00, smart boost: 1.00, linear profile: 1
[15:03:33] [D][auto_adaptive:312]: Z1 HEATING (Delta T): calculated_flow: 41.70°C (boost: 0.0)
[15:03:33] [D][auto_adaptive:092]: CMD: Set Z1 Heat Flow -> 41.7°C (42.2°C)
[15:08:33] [D][auto_adaptive:431]: [*] Starting auto-adaptive cycle, z2 independent: 1, has_cooling: 1, cold factor: 1.35, min delta T: 3.00, max delta T: 8.00
[15:08:33] [D][auto_adaptive:218]: Processing Zone 1: climate source: 0, Room=22.5, Target=22.5, Actual Feedtemp: 43.0, Return temp: 36.5, Outside: -4.0, Bias: 0.0, heating: 1, cooling: 0
[15:08:33] [D][auto_adaptive:238]: Effective delta T: 5.71, cold factor: 1.35, dynamic min delta T: 5.71, error factor: 0.00, smart boost: 1.00, linear profile: 1
[15:08:33] [D][auto_adaptive:312]: Z1 HEATING (Delta T): calculated_flow: 42.20°C (boost: 0.0)
[15:08:33] [D][auto_adaptive:092]: CMD: Set Z1 Heat Flow -> 42.2°C (41.7°C)
[15:08:34] [W][ecodan.component:352]: Command timed out. Retrying (attempt 2/30)...[1]
[15:10:17] [D][short_cycle:074]: Zone: 1: High Delta T detected (1.3°C). Starting timer.
[15:12:08] [I][short_cycle:244]: Compressor STOP detected
[15:12:08] [D][short_cycle:158]: Compressor stop event: stand-alone-cycle prevention: 0, saved z1 flow setpoint: 44.0, saved z2 flow setpoint: nan
[15:12:08] [I][short_cycle:198]: Lockout active. Expiration timestamp set to: 1770651648
[15:13:33] [D][auto_adaptive:362]: System is busy (DHW, Defrost, or Lockout). Exiting.
[15:18:33] [D][auto_adaptive:362]: System is busy (DHW, Defrost, or Lockout). Exiting.
[15:23:33] [D][auto_adaptive:362]: System is busy (DHW, Defrost, or Lockout). Exiting.
[15:28:33] [D][auto_adaptive:362]: System is busy (DHW, Defrost, or Lockout). Exiting.
[15:33:33] [D][auto_adaptive:362]: System is busy (DHW, Defrost, or Lockout). Exiting.
[15:38:33] [D][auto_adaptive:362]: System is busy (DHW, Defrost, or Lockout). Exiting.
[15:42:17] [I][short_cycle:222]: Lockout period has expired (Ecodan Time: 1770651662, Expiration: 1770651648). Restoring operations.
[15:42:44] [D][auto_adaptive:223]: Operation Mode Changed to heating: 5 -> 2
[15:42:44] [D][auto_adaptive:431]: [*] Starting auto-adaptive cycle, z2 independent: 1, has_cooling: 1, cold factor: 1.35, min delta T: 3.00, max delta T: 8.00
[15:42:44] [D][auto_adaptive:218]: Processing Zone 1: climate source: 0, Room=22.5, Target=22.5, Actual Feedtemp: 38.0, Return temp: 35.5, Outside: -4.0, Bias: 0.0, heating: 1, cooling: 0
[15:42:44] [D][auto_adaptive:238]: Effective delta T: 5.71, cold factor: 1.35, dynamic min delta T: 5.71, error factor: 0.00, smart boost: 1.00, linear profile: 1
[15:42:44] [D][auto_adaptive:312]: Z1 HEATING (Delta T): calculated_flow: 41.20°C (boost: 0.0)
[15:42:44] [D][auto_adaptive:092]: CMD: Set Z1 Heat Flow -> 41.2°C (42.2°C)
[15:43:33] [D][auto_adaptive:431]: [*] Starting auto-adaptive cycle, z2 independent: 1, has_cooling: 1, cold factor: 1.35, min delta T: 3.00, max delta T: 8.00
[15:43:33] [D][auto_adaptive:218]: Processing Zone 1: climate source: 0, Room=22.5, Target=22.5, Actual Feedtemp: 37.5, Return temp: 35.5, Outside: -4.0, Bias: 0.0, heating: 1, cooling: 0
[15:43:33] [D][auto_adaptive:238]: Effective delta T: 5.71, cold factor: 1.35, dynamic min delta T: 5.71, error factor: 0.00, smart boost: 1.00, linear profile: 1
[15:43:33] [D][auto_adaptive:312]: Z1 HEATING (Delta T): calculated_flow: 41.20°C (boost: 0.0)
[15:45:55] [I][short_cycle:252]: Compressor START detected
[15:45:55] [D][auto_adaptive:258]: Compressor start: triggering auto-adaptive loop.
[15:45:55] [D][auto_adaptive:431]: [*] Starting auto-adaptive cycle, z2 independent: 1, has_cooling: 1, cold factor: 1.35, min delta T: 3.00, max delta T: 8.00
[15:45:55] [D][auto_adaptive:218]: Processing Zone 1: climate source: 0, Room=22.5, Target=22.5, Actual Feedtemp: 37.0, Return temp: 35.5, Outside: -4.0, Bias: 0.0, heating: 1, cooling: 0
[15:45:55] [D][auto_adaptive:238]: Effective delta T: 5.71, cold factor: 1.35, dynamic min delta T: 5.71, error factor: 0.00, smart boost: 1.00, linear profile: 1
[15:45:55] [D][auto_adaptive:312]: Z1 HEATING (Delta T): calculated_flow: 41.20°C (boost: 0.0)
[15:48:33] [D][auto_adaptive:431]: [*] Starting auto-adaptive cycle, z2 independent: 1, has_cooling: 1, cold factor: 1.35, min delta T: 3.00, max delta T: 8.00
[15:48:33] [D][auto_adaptive:218]: Processing Zone 1: climate source: 0, Room=22.5, Target=22.5, Actual Feedtemp: 37.0, Return temp: 35.0, Outside: -4.0, Bias: 0.0, heating: 1, cooling: 0
[15:48:33] [D][auto_adaptive:238]: Effective delta T: 5.71, cold factor: 1.35, dynamic min delta T: 5.71, error factor: 0.00, smart boost: 1.00, linear profile: 1
[15:48:33] [D][auto_adaptive:312]: Z1 HEATING (Delta T): calculated_flow: 40.70°C (boost: 0.0)
[15:48:33] [D][auto_adaptive:092]: CMD: Set Z1 Heat Flow -> 40.7°C (41.2°C)
[15:53:33] [D][auto_adaptive:431]: [*] Starting auto-adaptive cycle, z2 independent: 1, has_cooling: 1, cold factor: 1.35, min delta T: 3.00, max delta T: 8.00
[15:53:33] [D][auto_adaptive:218]: Processing Zone 1: climate source: 0, Room=22.5, Target=22.5, Actual Feedtemp: 38.5, Return temp: 35.0, Outside: -4.0, Bias: 0.0, heating: 1, cooling: 0
[15:53:33] [D][auto_adaptive:238]: Effective delta T: 5.71, cold factor: 1.35, dynamic min delta T: 5.71, error factor: 0.00, smart boost: 1.00, linear profile: 1
[15:53:33] [D][auto_adaptive:312]: Z1 HEATING (Delta T): calculated_flow: 40.70°C (boost: 0.0)
[15:58:33] [D][auto_adaptive:431]: [*] Starting auto-adaptive cycle, z2 independent: 1, has_cooling: 1, cold factor: 1.35, min delta T: 3.00, max delta T: 8.00
[15:58:33] [D][auto_adaptive:218]: Processing Zone 1: climate source: 0, Room=22.5, Target=22.5, Actual Feedtemp: 41.0, Return temp: 35.5, Outside: -4.0, Bias: 0.0, heating: 1, cooling: 0
[15:58:33] [D][auto_adaptive:238]: Effective delta T: 5.71, cold factor: 1.35, dynamic min delta T: 5.71, error factor: 0.00, smart boost: 1.00, linear profile: 1
[15:58:33] [D][auto_adaptive:312]: Z1 HEATING (Delta T): calculated_flow: 41.20°C (boost: 0.0)
[15:58:33] [D][auto_adaptive:092]: CMD: Set Z1 Heat Flow -> 41.2°C (40.7°C)
[15:58:34] [W][ecodan.component:352]: Command timed out. Retrying (attempt 2/30)...[1]
[16:01:17] [D][short_cycle:074]: Zone: 1: High Delta T detected (1.3°C). Starting timer.
[16:03:33] [D][auto_adaptive:362]: System is busy (DHW, Defrost, or Lockout). Exiting.
[16:05:10] [I][short_cycle:244]: Compressor STOP detected
[16:05:10] [D][short_cycle:158]: Compressor stop event: stand-alone-cycle prevention: 0, saved z1 flow setpoint: 44.0, saved z2 flow setpoint: nan
[16:08:21] [D][auto_adaptive:232]: Defrost stop: triggering auto-adaptive loop.
[16:08:21] [D][auto_adaptive:362]: System is busy (DHW, Defrost, or Lockout). Exiting.
[16:08:33] [D][auto_adaptive:362]: System is busy (DHW, Defrost, or Lockout). Exiting.
[16:08:47] [D][short_cycle:119]: Defrost cycle finished. Updating last_defrost timestamp
[16:10:40] [D][auto_adaptive:223]: Operation Mode Changed to heating: 5 -> 2
[16:10:40] [D][auto_adaptive:431]: [*] Starting auto-adaptive cycle, z2 independent: 1, has_cooling: 1, cold factor: 0.73, min delta T: 3.00, max delta T: 8.00
[16:10:40] [D][auto_adaptive:218]: Processing Zone 1: climate source: 0, Room=22.5, Target=22.5, Actual Feedtemp: 42.0, Return temp: 38.5, Outside: 1.0, Bias: 0.0, heating: 1, cooling: 0
[16:10:40] [D][auto_adaptive:238]: Effective delta T: 4.47, cold factor: 0.73, dynamic min delta T: 4.47, error factor: 0.00, smart boost: 1.00, linear profile: 1
[16:10:40] [D][auto_adaptive:265]: Defrost logic: enabled=1, active=1, time_since=113327 ms
[16:10:40] [W][auto_adaptive:281]: Z1 Defrost Recovery: 8% done. Ramp Delta: 3.11 (Min: 3.00, Target: 4.47). Flow: 41.60
[16:10:40] [D][auto_adaptive:092]: CMD: Set Z1 Heat Flow -> 41.6°C (41.2°C)
[16:13:33] [D][auto_adaptive:431]: [*] Starting auto-adaptive cycle, z2 independent: 1, has_cooling: 1, cold factor: 0.84, min delta T: 3.00, max delta T: 8.00
[16:13:33] [D][auto_adaptive:218]: Processing Zone 1: climate source: 0, Room=22.5, Target=22.5, Actual Feedtemp: 37.0, Return temp: 38.0, Outside: 0.0, Bias: 0.0, heating: 1, cooling: 0
[16:13:33] [D][auto_adaptive:238]: Effective delta T: 4.69, cold factor: 0.84, dynamic min delta T: 4.69, error factor: 0.00, smart boost: 1.00, linear profile: 1
[16:13:33] [D][auto_adaptive:265]: Defrost logic: enabled=1, active=1, time_since=286226 ms
[16:13:33] [W][auto_adaptive:281]: Z1 Defrost Recovery: 19% done. Ramp Delta: 3.32 (Min: 3.00, Target: 4.69). Flow: 41.30
[16:13:33] [D][auto_adaptive:092]: CMD: Set Z1 Heat Flow -> 41.3°C (41.6°C)
[16:14:10] [I][short_cycle:252]: Compressor START detected
[16:14:10] [D][auto_adaptive:258]: Compressor start: triggering auto-adaptive loop.
[16:14:10] [D][auto_adaptive:431]: [*] Starting auto-adaptive cycle, z2 independent: 1, has_cooling: 1, cold factor: 0.96, min delta T: 3.00, max delta T: 8.00
[16:14:10] [D][auto_adaptive:218]: Processing Zone 1: climate source: 0, Room=22.5, Target=22.5, Actual Feedtemp: 37.0, Return temp: 37.5, Outside: -1.0, Bias: 0.0, heating: 1, cooling: 0
[16:14:10] [D][auto_adaptive:238]: Effective delta T: 4.92, cold factor: 0.96, dynamic min delta T: 4.92, error factor: 0.00, smart boost: 1.00, linear profile: 1
[16:14:10] [D][auto_adaptive:265]: Defrost logic: enabled=1, active=1, time_since=322745 ms
[16:14:10] [W][auto_adaptive:281]: Z1 Defrost Recovery: 22% done. Ramp Delta: 3.41 (Min: 3.00, Target: 4.92). Flow: 40.90
[16:14:10] [D][auto_adaptive:092]: CMD: Set Z1 Heat Flow -> 40.9°C (41.3°C)
[16:18:33] [D][auto_adaptive:431]: [*] Starting auto-adaptive cycle, z2 independent: 1, has_cooling: 1, cold factor: 1.35, min delta T: 3.00, max delta T: 8.00
[16:18:33] [D][auto_adaptive:218]: Processing Zone 1: climate source: 0, Room=22.5, Target=22.5, Actual Feedtemp: 37.5, Return temp: 35.5, Outside: -4.0, Bias: 0.0, heating: 1, cooling: 0
[16:18:33] [D][auto_adaptive:238]: Effective delta T: 5.71, cold factor: 1.35, dynamic min delta T: 5.71, error factor: 0.00, smart boost: 1.00, linear profile: 1
[16:18:33] [D][auto_adaptive:312]: Z1 HEATING (Delta T): calculated_flow: 41.20°C (boost: 0.0)
[16:18:33] [D][auto_adaptive:092]: CMD: Set Z1 Heat Flow -> 41.2°C (40.9°C)
[16:23:33] [D][auto_adaptive:431]: [*] Starting auto-adaptive cycle, z2 independent: 1, has_cooling: 1, cold factor: 1.35, min delta T: 3.00, max delta T: 8.00
[16:23:33] [D][auto_adaptive:218]: Processing Zone 1: climate source: 0, Room=22.5, Target=22.5, Actual Feedtemp: 40.0, Return temp: 35.5, Outside: -4.0, Bias: 0.0, heating: 1, cooling: 0
[16:23:33] [D][auto_adaptive:238]: Effective delta T: 5.71, cold factor: 1.35, dynamic min delta T: 5.71, error factor: 0.00, smart boost: 1.00, linear profile: 1
[16:23:33] [D][auto_adaptive:312]: Z1 HEATING (Delta T): calculated_flow: 41.20°C (boost: 0.0)
[16:28:17] [D][short_cycle:074]: Zone: 1: High Delta T detected (1.3°C). Starting timer.
[16:28:33] [D][auto_adaptive:431]: [*] Starting auto-adaptive cycle, z2 independent: 1, has_cooling: 1, cold factor: 1.35, min delta T: 3.00, max delta T: 8.00
[16:28:33] [D][auto_adaptive:218]: Processing Zone 1: climate source: 0, Room=22.5, Target=22.5, Actual Feedtemp: 42.5, Return temp: 36.0, Outside: -4.0, Bias: 0.0, heating: 1, cooling: 0
[16:28:33] [D][auto_adaptive:238]: Effective delta T: 5.71, cold factor: 1.35, dynamic min delta T: 5.71, error factor: 0.00, smart boost: 1.00, linear profile: 1
[16:28:33] [D][auto_adaptive:312]: Z1 HEATING (Delta T): calculated_flow: 41.70°C (boost: 0.0)
[16:28:33] [D][auto_adaptive:092]: CMD: Set Z1 Heat Flow -> 41.7°C (41.2°C)
[16:28:47] [D][short_cycle:098]: Zone: 1: High Delta T has disappeared. Resetting timer.
[16:29:17] [D][short_cycle:074]: Zone: 1: High Delta T detected (1.3°C). Starting timer.
[16:31:29] [I][short_cycle:244]: Compressor STOP detected
[16:31:29] [D][short_cycle:158]: Compressor stop event: stand-alone-cycle prevention: 0, saved z1 flow setpoint: 44.0, saved z2 flow setpoint: nan
[16:31:29] [I][short_cycle:198]: Lockout active. Expiration timestamp set to: 1770656419
[16:33:33] [D][auto_adaptive:362]: System is busy (DHW, Defrost, or Lockout). Exiting.
[16:38:33] [D][auto_adaptive:362]: System is busy (DHW, Defrost, or Lockout). Exiting.