#######################################################################
#######################      emonhub.conf     #########################
#######################################################################
### emonHub configuration file, for info see documentation:
### https://github.com/openenergymonitor/emonhub/blob/emon-pi/configuration.md
#######################################################################
#######################    emonHub  settings    #######################
#######################################################################

[hub]
    ### loglevel must be one of DEBUG, INFO, WARNING, ERROR, and CRITICAL
    loglevel = DEBUG
    autoconf = 1
### Uncomment this to also send to syslog
# use_syslog = yes
#######################################################################
#######################       Interfacers       #######################
#######################################################################

[interfacers]
    ### This interfacer manages the RFM12Pi/RFM69Pi/emonPi module
    [[EmonPi2]]
        Type = EmonHubOEMInterfacer
        [[[init_settings]]]
            com_port = /dev/ttyAMA0
            com_baud = 38400
        [[[runtimesettings]]]
            pubchannels = ToEmonCMS,
            subchannels = ToRFM12,
    
    [[USB0]]
        Type = EmonHubOEMInterfacer
        [[[init_settings]]]
            com_port = /dev/ttyUSB0
            com_baud = 115200
        [[[runtimesettings]]]
            pubchannels = ToEmonCMS,
            subchannels = ToRFM12,
            nodename = emonTx4
    
    [[SPI]]
        Type = EmonHubRFM69LPLInterfacer
        [[[init_settings]]]
            nodeid = 5
            networkID = 210
        [[[runtimesettings]]]
            pubchannels = ToEmonCMS,
    
    
    [[MQTT]]
        Type = EmonHubMqttInterfacer
        [[[init_settings]]]
            mqtt_host = 127.0.0.1
            mqtt_port = 1883
            mqtt_user = emonpi
            mqtt_passwd = emonpimqtt2016
        
        [[[runtimesettings]]]
            pubchannels = ToRFM12,
            subchannels = ToEmonCMS,
            
            # emonhub/rx/10/values format
            # Use with emoncms Nodes module
            node_format_enable = 0
            node_format_basetopic = emonhub/
            
            # emon/emontx/power1 format - use with Emoncms MQTT input
            # http://github.com/emoncms/emoncms/blob/master/docs/RaspberryPi/MQTT.md
            nodevar_format_enable = 1
            nodevar_format_basetopic = emon/
            
            # Single JSON payload published  - use with Emoncms MQTT
            node_JSON_enable = 0
            node_JSON_basetopic = emon/
    
    [[emoncmsorg]]
        Type = EmonHubEmoncmsHTTPInterfacer
        [[[init_settings]]]
        [[[runtimesettings]]]
            pubchannels = ToRFM12,
            subchannels = ToEmonCMS,
            url = https://emoncms.org
            apikey = *** REDACTED ***
            senddata = 1    # Enable sending data to Emoncms.org
            sendnames = 1    # Send full input names (compression will be automatically enabled)
            interval = 30    # Bulk send interval to Emoncms.org in seconds

#######################################################################
#######################          Nodes          #######################
#######################################################################

## See config user guide: https://github.com/openenergymonitor/emonhub
## If autoconf is enabled above, node configuration will automatically
## populate based on templates listed in available.conf

[nodes]
    [[23]]
        nodename = emonth2_23
        [[[rx]]]
            names = temperature, external temperature, humidity, battery, pulsecount
            datacodes = h, h, h, h, L
            scales = 0.1, 0.1, 0.1, 0.1, 1.0
            units = C, C, %, V, p

    [[24]]
        nodename = emonth2_24
        [[[rx]]]
            names = temperature, external_temp_0, external_temp_1, external_temp_2, humidity, battery, pulsecount
            datacodes = h, h, h, h, h, h, L
            scales = 0.1, 0.1, 0.1, 0.1, 0.1, 0.1, 1.0
            units = C, C, C, C, %, V, p