//Language pack for OpenEVSE

//#ifndef __Language__
//#define __Language__

// For making your own language make a copy of this file with name
// "language_yourlanguage.h" and include file in "open_evse.h" under language heading
// Remember LCD is only 16 characters wide and no special characters

//**********************************************************
//German translation - first try
//**********************************************************

#define STR_SETTINGS	    			"Einstellungen"
#define STR_SETUP					    "Allgemein"
#define STR_SERVICE_LEVEL			    "Netzspannung"
#define STR_MAX_CURRENT			  	    "Ladestrom max"
#define STR_DIODE_CHECK				    "Dioden Test"
#define STR_VENT_REQD_CHECK			    "Kuehlungs Test"
#define STR_BACKLIGHT_TYPE			    "Anzeigetyp"
#define STR_GROUND_CHECK			    "Erdungs Test"
#define STR_STUCK_RELAY_CHK			    "Relais Test"
#define STR_GFI_SELF_TEST			    "FI Selbst Test"
#define STR_TEMPERATURE_CHK			    "Temperatur Test"
#define STR_HIGH_TEMP			        "HIGH TEMP"
#define STR_YES_NO					    {"Ja", "Nein"}
#define STR_RESTART_NOW                 "Neustarten ?"
#define STR_RESTART					    "Neustart"
#define STR_EXIT					    "Menu beenden"
#define STR_DATE_TIME				    "Datum/Uhrzeit"
#define STR_MONTH				      	"Monat"
#define STR_DAY					        "Tag"
#define STR_YEAR                        "Jahr"
#define STR_HOUR                        "Stunde"
#define STR_MINUTE					    "Minute"
#define STR_DELAY_TIMER				    "Zeitsteuerung"
#define STR_START_HOUR			        "Ladebegin Stunde"
#define STR_START_MIN				    "Ladebegin Minute"
#define STR_STOP_HOUR				    "Ladeende Stunde"
#define STR_STOP_MIN				    "Ladeende Minute"
#define STR_CHARGE_LIMIT	  		    "Ladungs  Limit"
#define STR_TIME_LIMIT			  	    "Ladezeit Limit"
#define STR_RGB_MONOCHROME		        {"RGB","Monochrome"}
#define STR_POWER_ON		            "POWER ON"
#define STR_SELF_TEST				    "Selbsttest"
#define STR_AUTO_DETECT			  	    "Auto Detect"
#define STR_SVC_LEVEL_L1		  	    "Netzspannung: L1"
#define STR_SVC_LEVEL_L2		  	    "Netzspannung: L2"
#define STR_TEST_FAILED			  	    "SELBSTTEST FEHLER"
#define STR_EVSE_ERROR			  	    "WALLBOX FEHLER"
#define STR_SERVICE_REQUIRED		    "SERVICE NOETIG"
#define STR_VENT_REQUIRED			    "KUEHLUNG NOETIG"
#define STR_DIODE_CHECK_FAILED	        "DIODE DEFEKT"
#define STR_GFCI_FAULT				    "ERDSCHLUSS"
#define STR_GFCI					    "INTERNER FI"
#define STR_RETRY_IN				    "NEUSTART IN "
#define STR_OVER_TEMPERATURE		    "UEBERTEMPERATUR"
#define STR_NO_GROUND				    "ERDUNG FEHLT"
#define STR_STUCK_RELAY				    "RELAIS STECKT"
#define STR_DISABLED				    "Gesperrt"
#define STR_RESETTING                   "Neustart..."

#define STR_WAITING					    "Warten"
#define STR_SLEEPING				    "Pause"
#define STR_CONNECTED			        "Verbunden"
#define STR_TEST_DISABLED		        "TEST DISABLED"
#define STRF_L_A					    "L%d:%dA"
#define STR_READY					    "Bereit"
#define STR_CHARGING				    "Laden"
#define STRF_MAX_CURRENT			    "%s Ladestrom max"
#define STR_SET_DATE_TIME			    "Uhrzeit stellen ?"
#define STR_YESNO_SETSTART_SETSTOP	    {"Ja/Nein","Ladebeginn","Ladeende"}
#define STRF_WH						    "%5luWh"  
#define STRF_KWH					    "%6lukWh" 
#define STRF_VOLT                       " %3luV"
#define STR_AUTO					    "Auto" 
#define STR_LEVEL_1					    "Level 1 (120V)" 
#define STR_LEVEL_2					    "Level 2 (240V)"  
#define STR_L1						    "L1"  
#define STR_L2						    "L2"  
#define STR_OVER_CURRENT                "UEBERSTROM"
//#endif