-------------------------------------------------------------
emonTx34_CM_jeelib_classic Firmware Upload
-------------------------------------------------------------
Downloading firmware from: 
https://github.com/openenergymonitor/emontx3/releases/download/tx3-16-02-23/emonTx34_CM_jeelib_classic_2_4.hex

Downloaded file: 
-rw-r--r-- 1 pi pi 82K Feb 16 12:47 /opt/openenergymonitor/data/firmware/emonTx34_CM_jeelib_classic.hex

EmonHub is running, stopping EmonHub

Uploading emonTx34_CM_jeelib_classic on serial port ttyAMA0
Attempt 1...


avrdude-original: Version 6.3-20171130
                  Copyright (c) 2000-2005 Brian Dean, http://www.bdmicro.com/
                  Copyright (c) 2007-2014 Joerg Wunsch

                  System wide configuration file is "avrdude.conf"
                  User configuration file is "/root/.avrduderc"
                  User configuration file does not exist or is not a regular file, skipping

                  Using Port                    : /dev/ttyAMA0
                  Using Programmer              : arduino
                  Overriding Baud Rate          : 115200
                  AVR Part                      : ATmega328P
                  Chip Erase delay              : 9000 us
                  PAGEL                         : PD7
                  BS2                           : PC2
                  RESET disposition             : dedicated
                  RETRY pulse                   : SCK
                  serial program mode           : yes
                  parallel program mode         : yes
                  Timeout                       : 200
                  StabDelay                     : 100
                  CmdexeDelay                   : 25
                  SyncLoops                     : 32
                  ByteDelay                     : 0
                  PollIndex                     : 3
                  PollValue                     : 0x53
                  Memory Detail                 :

                                           Block Poll               Page                       Polled
                    Memory Type Mode Delay Size  Indx Paged  Size   Size #Pages MinW  MaxW   ReadBack
                    ----------- ---- ----- ----- ---- ------ ------ ---- ------ ----- ----- ---------
                    eeprom        65    20     4    0 no       1024    4      0  3600  3600 0xff 0xff
                    flash         65     6   128    0 yes     32768  128    256  4500  4500 0xff 0xff
                    lfuse          0     0     0    0 no          1    0      0  4500  4500 0x00 0x00
                    hfuse          0     0     0    0 no          1    0      0  4500  4500 0x00 0x00
                    efuse          0     0     0    0 no          1    0      0  4500  4500 0x00 0x00
                    lock           0     0     0    0 no          1    0      0  4500  4500 0x00 0x00
                    calibration    0     0     0    0 no          1    0      0     0     0 0x00 0x00
                    signature      0     0     0    0 no          3    0      0     0     0 0x00 0x00

                  Programmer Type : Arduino
                  Description     : Arduino
                  Hardware Version: 3
                  Firmware Version: 4.4
                  Vtarget         : 0.3 V
                  Varef           : 0.3 V
                  Oscillator      : 28.800 kHz
                  SCK period      : 3.3 us

avrdude-original: AVR device initialized and ready to accept instructions

Reading | ################################################## | 100% 0.00s

avrdude-original: Device signature = 0x1e950f (probably m328p)
avrdude-original: reading input file "/opt/openenergymonitor/data/firmware/emonTx34_CM_jeelib_classic.hex"
avrdude-original: writing flash (29626 bytes):

Writing | ################################################## | 100% 4.30s

avrdude-original: 29626 bytes of flash written
avrdude-original: verifying flash memory against /opt/openenergymonitor/data/firmware/emonTx34_CM_jeelib_classic.hex:
avrdude-original: load data flash data from input file /opt/openenergymonitor/data/firmware/emonTx34_CM_jeelib_classic.hex:
avrdude-original: input file /opt/openenergymonitor/data/firmware/emonTx34_CM_jeelib_classic.hex contains 29626 bytes
avrdude-original: reading on-chip flash data:

Reading | ################################################## | 100% 3.35s

avrdude-original: verifying ...
avrdude-original: 29626 bytes of flash verified

avrdude-original done.  Thank you.

avrdude-original: Using autoreset DTR on GPIO Pin 7
avrdude-original: Using autoreset DTR on GPIO Pin 7
avrdude-original: Using autoreset DTR on GPIO Pin 7
SUCCESS: flash verifed

Restarting EmonHub