12:23:00.412 -> emonTx V3 EmonLibCM Continuous Monitoring V1.50 12:23:00.412 -> OpenEnergyMonitor.org 12:23:00.412 -> No EEPROM setting found...using default values 12:23:00.412 -> Calibration: 12:23:00.412 -> vCal = 268.97 12:23:00.412 -> i1Cal = 90.90 12:23:00.412 -> i1Lead = 4.20 12:23:00.412 -> i2Cal = 90.90 12:23:00.412 -> i2Lead = 4.20 12:23:00.412 -> i3Cal = 90.90 12:23:00.412 -> i3Lead = 4.20 12:23:00.412 -> i4Cal = 16.67 12:23:00.412 -> i4Lead = 1.00 12:23:00.412 -> RFM69CW Node: 15 Freq: 433MHz Group: 210 12:23:00.412 -> 12:23:00.412 -> RFM int... 12:23:01.522 -> '+++' then [Enter] now to enter config mode...5s 12:23:06.549 -> CT1 detected, i1Cal:90.90 12:23:06.549 -> CT2 detected, i2Cal:90.90 12:23:06.549 -> CT3 detected, i3Cal:90.90 12:23:06.549 -> CT4 detected, i4Cal:16.67 12:23:16.963 -> AC present 12:23:17.000 -> MSG:1,Vrms:250.19,P1:-3,P2:13,P3:26,P4:383,E1:0,E2:0,E3:0,E4:1,pulse:0 12:23:26.998 -> MSG:2,Vrms:249.64,P1:-3,P2:13,P3:26,P4:382,E1:0,E2:0,E3:0,E4:2,pulse:0 12:23:36.991 -> MSG:3,Vrms:249.63,P1:-3,P2:18,P3:26,P4:382,E1:0,E2:0,E3:0,E4:3,pulse:0 12:23:46.999 -> MSG:4,Vrms:249.67,P1:-3,P2:5,P3:26,P4:382,E1:0,E2:0,E3:0,E4:4,pulse:0