2018-10-29 14:17:16,940 INFO MainThread EmonHub emonHub emon-pi variant v2.1.1 2018-10-29 14:17:16,941 INFO MainThread Opening hub... 2018-10-29 14:17:16,942 INFO MainThread Logging level set to DEBUG 2018-10-29 14:17:16,942 INFO MainThread Creating EmonHubJeeInterfacer 'RFM2Pi' 2018-10-29 14:17:16,947 DEBUG MainThread Opening serial port: /dev/ttyAMA0 @ 38400 bits/s 2018-10-29 14:17:18,951 INFO MainThread RFM2Pi device firmware version: [RF12demo.14] 2018-10-29 14:17:18,952 INFO MainThread RFM2Pi device current settings: E i5 g210 @ 433 MHz 2018-10-29 14:17:18,952 INFO MainThread Setting RFM2Pi quiet: 0 (0q) 2018-10-29 14:17:19,954 INFO MainThread Setting RFM2Pi calibration: 110V (2p) 2018-10-29 14:41:53,792 DEBUG MainThread Setting RFM2Pi subchannels: ['ToRFM12'] 2018-10-29 14:41:53,792 DEBUG MainThread Setting RFM2Pi pubchannels: ['ToEmonCMS'] 2018-10-29 14:41:53,793 INFO MainThread Creating EmonHubMqttInterfacer 'MQTT' 2018-10-29 14:41:53,795 DEBUG RFM2Pi acknowledged command: > 0q 2018-10-29 14:41:53,796 DEBUG MainThread Setting MQTT subchannels: ['ToEmonCMS'] 2018-10-29 14:41:53,797 DEBUG MainThread Setting MQTT pubchannels: ['ToRFM12'] 2018-10-29 14:41:53,797 INFO MainThread Setting MQTT nodevar_format_enable: 1 2018-10-29 14:41:53,797 INFO MainThread Setting MQTT node_format_enable: 1 2018-10-29 14:41:53,798 INFO MainThread Setting MQTT nodevar_format_basetopic: emon/ 2018-10-29 14:41:53,800 INFO MainThread Creating EmonHubEmoncmsHTTPInterfacer 'emoncmsorg' 2018-10-29 14:41:53,802 DEBUG MainThread Setting emoncmsorg subchannels: ['ToEmonCMS'] 2018-10-29 14:41:53,802 DEBUG MainThread Setting emoncmsorg pubchannels: ['ToRFM12'] 2018-10-29 14:41:53,803 INFO MainThread Setting emoncmsorg url: https://emoncms.org 2018-10-29 14:41:53,803 INFO MainThread Setting emoncmsorg senddata: 0 2018-10-29 14:41:53,803 WARNING MainThread Setting emoncmsorg apikey: obscured 2018-10-29 14:41:53,803 INFO MainThread Setting emoncmsorg sendstatus: 1 2018-10-29 14:41:53,896 DEBUG RFM2Pi device settings updated: E i5 g210 @ 433 MHz 2018-10-29 14:41:53,998 DEBUG RFM2Pi acknowledged command: > 2p 2018-10-29 14:41:54,302 DEBUG RFM2Pi acknowledged command: i - set node ID (standard node ids are 1..30) 2018-10-29 14:41:54,405 DEBUG RFM2Pi acknowledged command: b - set MHz band (4 = 433, 8 = 868, 9 = 915) 2018-10-29 14:41:54,509 DEBUG RFM2Pi acknowledged command: o - change frequency offset within the band (default 1600) 2018-10-29 14:41:54,714 DEBUG RFM2Pi acknowledged command: g - set network group (RFM12 only allows 212, 0 = any) 2018-10-29 14:41:54,817 DEBUG RFM2Pi acknowledged command: c - set collect mode (advanced, normally 0) 2018-10-29 14:41:55,023 DEBUG RFM2Pi acknowledged command: ..., a - send data packet to node , request ack 2018-10-29 14:41:55,126 DEBUG RFM2Pi acknowledged command: ..., s - send data packet to node , no ack 2018-10-29 14:41:55,229 DEBUG RFM2Pi acknowledged command: q - set quiet mode (1 = don't report bad packets) 2018-10-29 14:41:55,333 DEBUG RFM2Pi acknowledged command: x - set reporting format (0: decimal, 1: hex, 2: hex+ascii) 2018-10-29 14:41:55,436 DEBUG RFM2Pi acknowledged command: y - enable signal strength trace mode, default:0 (disabled) 2018-10-29 14:41:55,540 DEBUG RFM2Pi acknowledged command: sample interval secs/100 (0.01s-2.5s) eg 10y=0.1s 2018-10-29 14:41:55,847 DEBUG RFM2Pi acknowledged command: ,,, f - FS20 command (868 MHz) 2018-10-29 14:41:55,950 DEBUG RFM2Pi acknowledged command: ,, k - KAKU command (433 MHz) 2018-10-29 14:41:56,153 DEBUG RFM2Pi device settings updated: E i5 g210 @ 433 MHz 2018-10-29 14:41:56,356 DEBUG RFM2Pi device settings updated: [RF12demo.14] E i5 g210 @ 433 MHz 2018-10-29 14:41:56,559 DEBUG RFM2Pi device settings updated: [RF12demo.14] E i5 g210 @ 433 MHz 2018-10-29 14:41:57,264 DEBUG RFM2Pi device settings updated: [RF12demo.14] E i5 g210 @ 433 MHz ...