#######################################################################
#######################      emonhub.conf     #########################
#######################################################################
### emonHub configuration file, for info see documentation:
### http://github.com/openenergymonitor/emonhub/blob/emon-pi/configuration.md
#######################################################################
#######################    emonHub  settings    #######################
#######################################################################

[hub]
### loglevel must be one of DEBUG, INFO, WARNING, ERROR, and CRITICAL
loglevel = DEBUG
### Uncomment this to also send to syslog
# use_syslog = yes
#######################################################################
#######################       Interfacers       #######################
#######################################################################

[interfacers]
### This interfacer manages the RFM12Pi/RFM69Pi/emonPi module
[[RFM2Pi]]
    Type = EmonHubJeeInterfacer
    [[[init_settings]]]
        com_port = /dev/ttyAMA0
        com_baud = 38400                        # 9600 for old RFM12Pi
    [[[runtimesettings]]]
        pubchannels = ToEmonCMS,
        subchannels = ToRFM12,

        group = 210
        frequency = 433
        baseid = 5                              # emonPi / emonBase nodeID
        quiet = true                            # Report incomplete RF packets (no implemented on emonPi)
        calibration = 230V                      # (UK/EU: 230V, US: 110V)
        # interval =  0                         # Interval to transmit time to emonGLCD (seconds)

[[MQTT]]

    Type = EmonHubMqttInterfacer
    [[[init_settings]]]
        mqtt_host = 127.0.0.1
        mqtt_port = 1883
        mqtt_user = emonpi
        mqtt_passwd = emonpimqtt2016

    [[[runtimesettings]]]
        pubchannels = ToRFM12,
        subchannels = ToEmonCMS,

        # emonhub/rx/10/values format
        # Use with emoncms Nodes module
        node_format_enable = 1
        node_format_basetopic = emonhub/

        # emon/emontx/power1 format - use with Emoncms MQTT input
        # http://github.com/emoncms/emoncms/blob/master/docs/RaspberryPi/MQTT.md
        nodevar_format_enable = 1
        nodevar_format_basetopic = emon/

[[emoncmsorg]]
    Type = EmonHubEmoncmsHTTPInterfacer
    [[[init_settings]]]
    [[[runtimesettings]]]
        pubchannels = ToRFM12,
        subchannels = ToEmonCMS,
#      url = https://emoncms.org
        url = http://192.168.10.90/emoncms
        apikey = 4f96fda72039fe5ee4eda218b3682ac4
        senddata = 1                    # Enable sending data to Emoncms.org
        sendstatus = 1                  # Enable sending WAN IP to Emoncms.org MyIP > https://emoncms.org/myip/list
        sendinterval= 30                # Bulk send interval to Emoncms.org in seconds

#######################################################################
#######################          Nodes          #######################
#######################################################################

[nodes]

## See config user guide: http://github.com/openenergymonitor/emonhub/blob/master/configuration.md

[[5]]
    nodename = emonpi
    [[[rx]]]
        names = RearPV,FrontPV,TotalGeneration,vrms,t1,t2,t3,t4,t5,t6,pulsecount,Irms1,Irms2,Irms1_plus_2,powerFactor1,powerFactor2
        datacodes = h, h, h, h, h, h, h, h, h, h, L, h, h, h, h, h
        scales = 1,1,1,0.01,0.1,0.1,0.1,0.1,0.1,0.1,1,0.1,0.1,0.1,0.01,0.01
        units = W,W,W,V,C,C,C,C,C,C,p,A,A,A,C,C

[[6]]
    nodename = emontxshield
    [[[rx]]]
       names = power1, power2, power3, power4, vrms
       datacode = h
       scales = 1,1,1,1,0.01
       units =W,W,W,W,V

[[7]]
   nodename = emonTx_Node7
    [[[rx]]]
       names = Commando_Skt, Air_Con, Outside_Sockets, Outside_Lights, vrms, temp1, temp2, temp3, temp4, temp5, temp6, pulse, Irms1, Irms2, Irms3, Irms4, powerFactor1, powerFactor2, powerFactor3, powerFactor4
       datacodes = h,h,h,h,h,h,h,h,h,h,h,L,h,h,h,h,h,h,h,h
       scales = 1,1,1,1,0.01,0.1,0.1, 0.1,0.1,0.1,0.1,1,0.1,0.1,0.1,0.1,0.01,0.01,0.01,0.01
       units =W,W,W,W,V,C,C,C,C,C,C,p,A,A,A,A,C,C,C,C

[[8]]
    nodename = emonTx_Node8
    [[[rx]]]
       names = Upstairs_Sockets, Shed_Submain, Loft_Sockets, Upstairs_Lights, vrms, temp1, temp2, temp3, temp4, temp5, temp6, pulse, Irms1, Irms2, Irms3, Irms4, powerFactor1, powerFactor2, powerFactor3, powerFactor4
       datacodes = h,h,h,h,h,h,h,h,h,h,h,L,h,h,h,h,h,h,h,h
       scales = 1,1,1,1,0.01,0.1,0.1, 0.1,0.1,0.1,0.1,1,0.1,0.1,0.1,0.1,0.01,0.01,0.01,0.01
       units =W,W,W,W,V,C,C,C,C,C,C,p,A,A,A,A,C,C,C,C

[[9]]
   nodename = emonTx_Node9
    [[[rx]]]
       names = Supply, Kitchen_Sockets, Downstairs_Sockets, Downstairs_Lights, vrms, temp1, temp2, temp3, temp4, temp5, temp6, pulse, Irms1, Irms2, Irms3, Irms4, powerFactor1, powerFactor2, powerFactor3, powerFactor4
       datacodes = h,h,h,h,h,h,h,h,h,h,h,L,h,h,h,h,h,h,h,h
       scales = 1,1,1,1,0.01,0.1,0.1, 0.1,0.1,0.1,0.1,1,0.1,0.1,0.1,0.1,0.01,0.01,0.01,0.01
       units =W,W,W,W,V,C,C,C,C,C,C,p,A,A,A,A,C,C,C,C

[[10]]
    nodename = emonTx_Diverter
    [[[rx]]]
        names = Grid_Watts, Diverted_Watts, Cooker, Shower, Diverted_Energy_WattHours, vrms, temp
        datacodes = h, h, h, h, h, h, h
        scales = 1,1,1,1,1,0.01,0.1
        units = W,W,W,W,W,V,C

[[11]]
   nodename = emonTx_Node11
   [[[rx]]]
      names = power1, power2, power3, power4, vrms, temp1, temp2, temp3, temp4, temp5, temp6, pulse
      datacodes = h,h,h,h,h,h,h,h,h,h,h,L
      scales = 1,1,1,1,0.01,0.1,0.1, 0.1,0.1,0.1,0.1,1
      units =W,W,W,W,V,C,C,C,C,C,C,p

[[19]]
   nodename = emonth1
   [[[rx]]]
      names = temperature, external temperature, humidity, battery
      datacode = h
      scales = 0.1,0.1,0.1,0.1
      units = C,C,%,V

[[20]]
   nodename = emonth2
   [[[rx]]]
      names = temperature, external temperature, humidity, battery
      datacode = h
      scales = 0.1,0.1,0.1,0.1
      units = C,C,%,V

[[21]]
   nodename = emonth3
   [[[rx]]]
      names = temperature, external temperature, humidity, battery
      datacode = h
      scales = 0.1,0.1,0.1,0.1
      units = C,C,%,V

[[22]]
   nodename = emonth4
   [[[rx]]]
      names = temperature, external temperature, humidity, battery
      datacode = h
      scales = 0.1,0.1,0.1,0.1
      units = C,C,%,V
[[23]]
    nodename = emonth5
    [[[rx]]]
       names = temperature, external temperature, humidity, battery, pulsecount
       datacodes = h,h,h,h,L
       scales = 0.1,0.1,0.1,0.1,1
       units = C,C,%,V,p

[[24]]
    nodename = emonth6
    [[[rx]]]
       names = temperature, external temperature, humidity, battery, pulsecount
       datacodes = h,h,h,h,L
       scales = 0.1,0.1,0.1,0.1,1
       units = C,C,%,V,p

[[25]]
    nodename = emonth7
    [[[rx]]]
       names = temperature, external temperature, humidity, battery, pulsecount
       datacodes = h,h,h,h,L
       scales = 0.1,0.1,0.1,0.1,1
       units = C,C,%,V,p

[[26]]
    nodename = emonth8
    [[[rx]]]
       names = temperature, external temperature, humidity, battery, pulsecount
       datacodes = h,h,h,h,L
       scales = 0.1,0.1,0.1,0.1,1
       units = C,C,%,V,p