# \#rfm2pi

**URL:** https://community.openenergymonitor.org/tag/rfm2pi/58.md

[Latest](https://community.openenergymonitor.org/latest.md) · [Categories](https://community.openenergymonitor.org/categories.md) · [Tags](https://community.openenergymonitor.org/tags.md)

---

## [RFM12Pi with RFM69c](https://community.openenergymonitor.org/t/rfm12pi-with-rfm69c/4805)

<div class="topic-metadata">

**Author:** [@mattltm](https://community.openenergymonitor.org/u/mattltm)\
**Replies:** 4\
**Last updated:** [25 April 2018 15:42 UTC](https://community.openenergymonitor.org/t/rfm12pi-with-rfm69c/4805 "2018-04-25T15:42:49Z")

</div>

My old RFM12Pi (V1) has suffered an unfortunate accident (damaged RFM12) but rather than throw the whole lot away i’m thinking about replacing the radio with an RFM69C so I can take advantage of additional features like …

---

## [RFM69Pi stops updating/freezes](https://community.openenergymonitor.org/t/rfm69pi-stops-updating-freezes/137)

<div class="topic-metadata">

**Author:** [@Paul](https://community.openenergymonitor.org/u/Paul)\
**Replies:** 13\
**Last updated:** [10 May 2016 18:57 UTC](https://community.openenergymonitor.org/t/rfm69pi-stops-updating-freezes/137 "2016-05-10T18:57:14Z")

</div>

This thread is a continuation of a thread started in the old forum A number of users have experienced their RFM69Pi module stopping or freezing, causing emoncms to stop updating it’s RF derived feeds. This can occur at…

---

## [RFM2Pi thread dead: Caused by 3phase decoder settings](https://community.openenergymonitor.org/t/rfm2pi-thread-dead-caused-by-3phase-decoder-settings/4517)

<div class="topic-metadata">

**Author:** [@Greebo](https://community.openenergymonitor.org/u/Greebo)\
**Replies:** 6\
**Last updated:** [10 July 2017 14:15 UTC](https://community.openenergymonitor.org/t/rfm2pi-thread-dead-caused-by-3phase-decoder-settings/4517 "2017-07-10T14:15:38Z")

</div>

I’ve just spent a few hours playing with my new emonTx v3.4 in preparation for monitoring my 3 phase power. As required for this, I downloaded the 3phase firmware and started editing my way to a calibrated setup. I noti…

---

## [Reliability of Emon Pi and purchaser expectations](https://community.openenergymonitor.org/t/reliability-of-emon-pi-and-purchaser-expectations/3919)

<div class="topic-metadata">

**Author:** [@Duchess](https://community.openenergymonitor.org/u/Duchess)\
**Replies:** 20\
**Last updated:** [18 May 2017 00:31 UTC](https://community.openenergymonitor.org/t/reliability-of-emon-pi-and-purchaser-expectations/3919 "2017-05-18T00:31:27Z")

</div>

So I spent over £400 in the OpenEnergyMonitor shop buying an EmonPi, some emon Tx’s and transducers. When it works, it appears to be ok and is capturing the data I expected. However, because the EmonHub keeps crashing w…

---

## [RFM2Pi with RFM12B](https://community.openenergymonitor.org/t/rfm2pi-with-rfm12b/387)

<div class="topic-metadata">

**Author:** [@GadgetUK](https://community.openenergymonitor.org/u/GadgetUK)\
**Replies:** 11\
**Last updated:** [15 May 2016 16:08 UTC](https://community.openenergymonitor.org/t/rfm2pi-with-rfm12b/387 "2016-05-15T16:08:33Z")

</div>

So after a little time away from tinkering I’ve decided to try and get back into energy monitoring. I’ve plugged my (As yet unused) rfm2pi into my Pi3, and followed the instructions located here: https://wiki.openenerg…