# \#lcd **URL:** https://community.openenergymonitor.org/tag/lcd/398.md [Latest](https://community.openenergymonitor.org/latest.md) · [Categories](https://community.openenergymonitor.org/categories.md) · [Tags](https://community.openenergymonitor.org/tags.md) --- ## [Landis GYR+E110 Single Phase Watt Hour Meter LCD fault](https://community.openenergymonitor.org/t/landis-gyr-e110-single-phase-watt-hour-meter-lcd-fault/26000)
**Author:** [@Lanny1](https://community.openenergymonitor.org/u/Lanny1)\ **Replies:** 0\ **Last updated:** [17 April 2024 09:52 UTC](https://community.openenergymonitor.org/t/landis-gyr-e110-single-phase-watt-hour-meter-lcd-fault/26000 "2024-04-17T09:52:06Z")
Hello. my meter has lost all the segments and i need to take a reading for EDF to make my FIT payment. Apparently i have 2 options, use the meter reading port which i have no knowledge of, or , replace the LCD with eithe… --- ## [Using Arduino and Emonlib to view on LCD and log to an SD card](https://community.openenergymonitor.org/t/using-arduino-and-emonlib-to-view-on-lcd-and-log-to-an-sd-card/23936)
**Author:** [@spineytoo](https://community.openenergymonitor.org/u/spineytoo)\ **Replies:** 28\ **Last updated:** [24 July 2023 16:36 UTC](https://community.openenergymonitor.org/t/using-arduino-and-emonlib-to-view-on-lcd-and-log-to-an-sd-card/23936 "2023-07-24T16:36:14Z")
I built an arduino weather station 9 years ago with Adafruit RGBLCD and SD card shields. I am very rusty and forgetful now. I have bought a SCT 013 030 (Voltage) current transformer. I have downloaded your “How to build … --- ## [Configuring a GPIO LCD](https://community.openenergymonitor.org/t/configuring-a-gpio-lcd/19398)
**Author:** [@mjr](https://community.openenergymonitor.org/u/mjr)\ **Replies:** 1\ **Last updated:** [3 March 2022 12:54 UTC](https://community.openenergymonitor.org/t/configuring-a-gpio-lcd/19398 "2022-03-03T12:54:26Z")
Hi. I’m running emonSD on an old R Pi 2 with some add-on boards and it basically seems to work OK (the web and ssh interfaces seem to work), but EmonPiLCD doesn’t run and my LCD display is blank. I think it’s expecting a… --- ## [emonPiLCD service repeatedly dying](https://community.openenergymonitor.org/t/emonpilcd-service-repeatedly-dying/19648)
**Author:** [@Simonsse](https://community.openenergymonitor.org/u/Simonsse)\ **Replies:** 0\ **Last updated:** [28 January 2022 20:01 UTC](https://community.openenergymonitor.org/t/emonpilcd-service-repeatedly-dying/19648 "2022-01-28T20:01:11Z")
My emonPiLCD service keeps dying. I can manually restart it, but it dies again. Should I care? The LCD seems to be showing all I need, though maybe its not updating, but I rarely go to the meter box to interact wit… --- ## [Emonbase display and buttons](https://community.openenergymonitor.org/t/emonbase-display-and-buttons/8422)
**Author:** [@Boye](https://community.openenergymonitor.org/u/Boye)\ **Replies:** 6\ **Last updated:** [22 January 2021 13:06 UTC](https://community.openenergymonitor.org/t/emonbase-display-and-buttons/8422 "2021-01-22T13:06:47Z")
Hi I have connected at 2x16 lcd display to my emonpi (raspberry PI3). and it works like on a Emonpi… Now I would like to connect two buttons, one for safely powering down and one for cycling through the different displ… --- ## [Python3](https://community.openenergymonitor.org/t/python3/9950)
**Author:** [@bwduncan](https://community.openenergymonitor.org/u/bwduncan)\ **Replies:** 8\ **Last updated:** [31 December 2019 17:12 UTC](https://community.openenergymonitor.org/t/python3/9950 "2019-12-31T17:12:06Z")
Hi folks, python2 is EOL this year. (1 Jan 2020) I’ve been looking at some of the python2 code on my emonpi and porting it to python3. It’s pretty simple stuff: put parentheses around print calls, don’t mix tabs and spa… --- ## [EmonTx + ESP + LCD new install](https://community.openenergymonitor.org/t/emontx-esp-lcd-new-install/2815)
**Author:** [@CapnBry](https://community.openenergymonitor.org/u/CapnBry)\ **Replies:** 17\ **Last updated:** [8 March 2019 15:12 UTC](https://community.openenergymonitor.org/t/emontx-esp-lcd-new-install/2815 "2019-03-08T15:12:05Z")
I just came in from finishing the final installation of my EmonTx v3 system and wanted to come give my thanks to the hardware and software developers who have made this project so great. I have been using EmonCMS since i… --- ## [emonPi LCD V3.0 Update: SSH toggle, Shutdown, Config & CPU reduction](https://community.openenergymonitor.org/t/emonpi-lcd-v3-0-update-ssh-toggle-shutdown-config-cpu-reduction/9459)
**Author:** [@glyn.hudson](https://community.openenergymonitor.org/u/glyn.hudson)\ **Replies:** 4\ **Last updated:** [20 December 2018 00:38 UTC](https://community.openenergymonitor.org/t/emonpi-lcd-v3-0-update-ssh-toggle-shutdown-config-cpu-reduction/9459 "2018-12-20T00:38:14Z")
Following on from the emonPi SSH disabled by default thread, thanks a lot for everyone who contributed. With significant contribution from @alandpearson we have now implemented an update (V3.0.1) to the emonPi LCD ser… --- ## [emonPi LCD staying on](https://community.openenergymonitor.org/t/emonpi-lcd-staying-on/9596)
**Author:** [@Tockley](https://community.openenergymonitor.org/u/Tockley)\ **Replies:** 3\ **Last updated:** [28 December 2018 23:11 UTC](https://community.openenergymonitor.org/t/emonpi-lcd-staying-on/9596 "2018-12-28T23:11:20Z")
Hi guys - just wondering if there is a way to modify LCD behaviour or maybe I have a bug? In previous builds of Emon my LCD would timeout and turn itself off but I’ve noticed that on the 30Oct18 build my LCD is staying o…