# Trying to understand Start/Stop conditions of my (vallaint) heat pump

**URL:** <https://community.openenergymonitor.org/t/trying-to-understand-start-stop-conditions-of-my-vallaint-heat-pump/29309>\
**Category:** Heatpump\
**Tags:** vaillant, heatpumpmonitor\
**Created:** [29 October 2025 15:36 UTC](https://community.openenergymonitor.org/t/trying-to-understand-start-stop-conditions-of-my-vallaint-heat-pump/29309 "2025-10-29T15:36:04Z")\
**Posts on this page:** 1\
**Page:** 1

<div class="post-metadata">

**Author:** ![bandeiri](https://community.openenergymonitor.org/letter_avatar_proxy/v4/letter/b/a9a28c/32.png) [@bandeiri](https://community.openenergymonitor.org/u/bandeiri)\
**Post date:** [29 October 2025 15:36 UTC](https://community.openenergymonitor.org/t/trying-to-understand-start-stop-conditions-of-my-vallaint-heat-pump/29309/1 "2025-10-29T15:36:04Z")

</div>

Hello all,  
I’m new to this forum and I would like to start monitoring all the different “variables/parameters” of my vaillant heatpump I’ve a working ebusd where I can read all the different variables directly from the ebus with a dongle that i’ve purchased recently.

One of the 1st things I would like to understand and demystify are the conditions that make my compressor start and stop. I still don’t quite understand ….yes i’m familiar with the energy integral , compressor hysteresis , desired Flow temperature.. but there are still some unknowns to me…

Can someone point me in the right direction to start looking into all those variables in a nice dashboard ?
