SSH password error

CelsoHenriques · 2018-12-13T10:50:13.641Z

Hi all.

As i can see, the new password for SSH login is emonpi2018 (as it says on the emonpi LCD) but after trying without success, i found out that is actually emonpi2016. Can someone rectify this?
Thanks

TrystanLea · 2018-12-13T11:31:26.350Z

Hello @CelsoHenriques this has been fixed in a newer version, if you run emonpi update it should work fine (It doesn’t show the password anymore either).

Greebo · 2018-12-14T00:45:45.513Z

Does EmonPi Update change the “pi” password?

I’m confused how an EmonPi update could “fix” this issue… Unless the fix is just to not show the password on the LCD?

CelsoHenriques · 2018-12-14T04:56:29.000Z

Thanks. Going to update it again.

Another thing:

As you could notice, as i dont always visit the comunity webpage, we need to pin a post with those changes, the ones that are “visible”. Since i have been messing with node-red on my emonpi these days, the backlight always on make me believe that i somehow missed with the lcd config file. Until i find out that the git file was changed.

Na(o) quinta, 13/12/2018, 11:36, Trystan Lea noreply@community.openenergymonitor.org escreveu:

TrystanLea · 2018-12-14T11:44:26.661Z

Greebo:

Does EmonPi Update change the “pi” password?

No, my understanding from talking to @glyn.hudson is that showing the default password was removed and that the password shown was incorrect. The actual password at the time was still emonpi2016 not 2018.

Greebo · 2018-12-14T12:00:17.832Z

Thanks Trystan. Hopefully you can see how your post could have been confusing

glyn.hudson · 2018-12-15T02:41:37.205Z

Password is not displayed anymore, it’s also now possible to toggle SSH. Please ensure you updated to latest version by running Setup > Admin > emonPi update in local emoncms. See this post for how the latest emonPi LCD service works:

emonPi LCD V3.0 Update: SSH toggle, Shutdown, Config & CPU reduction emonPi

Following on from the emonPi SSH disabled by default thread, thanks a lot for everyone who contributed. With significant contribution from @alandpearson we have now implemented an update (V3.0.1) to the emonPi LCD service. The update will make it easy to toggle SSH (enable/disable) as required on all emonPi’s. The main features of the update are: Add toggle SSH features to the LCD Add shutdown feature to the LCD (shutdown button still works the same) Add config file for customizing the LCD …

borpin · 2019-11-29T12:24:54.024Z

5 posts were split to a new topic: SSH problem with MacOS