Split phase process power1pluspower2

jrmoralesc · 2016-10-21T20:09:10.487Z

No, where can I get that?

Jon · 2016-10-21T20:18:57.522Z

One timezone is located here:

Setup > My Account and then look for Timezone

Screen Shot 2016-10-21 at 3.16.13 PM.png1690×805 78.6 KB

click on the Pencil on the right

I’ll send you the second timezone in a moment…

Jon · 2016-10-21T20:37:33.912Z

the second Timezone setting is via the Terminal. Connect via SSH to your emonPi. And then type in Date at the $ prompt

pi@emonpi:~ $ date
Fri Oct 21 15:36:08 CDT 2016
pi@emonpi:~ $

if it is not correct, follow these instructions:

Guide | OpenEnergyMonitor

Troubleshooting

Troubleshooting issues debugging

Jon · 2016-10-21T20:41:54.552Z

for the Feeds graph, on the line for use_kwh click the right box.

PANTALLAS-2.jpg1526×1106 175 KB

jrmoralesc · 2016-10-21T21:07:41.471Z

Pasted image1024×768 177 KB

Jon · 2016-10-21T21:13:02.143Z

Sorry Ruben - the user guide is wrong. the command is:

sudo raspi-config

I’ll send in a fix for the User Guide

jrmoralesc · 2016-10-21T21:18:18.497Z

Pasted image1024×768 112 KB

It look ok.

jrmoralesc · 2016-10-21T21:23:21.428Z

Pasted image1024×768 127 KB

Jon · 2016-10-21T21:39:00.544Z

I forgot you had an emonPi! Sorry again! I have an emonPi also, so I should know better!

rpi-rw
sudo raspi-config

and then when done setting the date & time:

rpi-ro

jrmoralesc · 2016-10-21T21:57:59.071Z

The time and date is ok, the graps is showing value bust still no showing Used now

blob.jpg1024×768 161 KB

Jon · 2016-10-21T23:00:08.890Z

I am curious - was the date correct when running the date command or the sudo raspi-config command?

In the My Electric screen, click on the Spanner/Wrench and send a screen shot of that screen.

(I am running out of ideas and will probably need to bring in the experts!)

jrmoralesc · 2016-10-21T23:05:04.000Z

You can access trought my pc with teamviewer 10.

jrmoralesc · 2016-10-21T23:13:29.112Z

Pasted image1024×768 189 KB

Pasted image1024×768 172 KB

Jon · 2016-10-21T23:18:21.417Z

Is the Feeds page still updating OK? or are there big holes in the data?

Pasted image1024×768 112 KB

If this is still OK then I’ve run out of ideas. I know there is a app or function that needs to run for 24 hours before displaying data. I don’t believe it is the My Electric app but it might be.

jrmoralesc · 2016-10-22T01:48:12.380Z

Im still with the problem, better if you access my computer please.

jrmoralesc · 2016-10-22T03:04:03.958Z

use_total_kwh is in 1.X:

Pasted image1024×768 100 KB

glyn.hudson · 2016-10-22T10:19:13.933Z

Sorry to see your still having trouble. Let’s see if we can view the KWh data via vis viewer.

In local Emoncms choose > Extra > Visulazatrion > then select Bar Graph

Select your feeds and apply the following options. Delta = On is important

You should see daily kwh data like:

dailykwh.png1107×618 57.7 KB

See full instructions of how to view and log Kw/hr data: http://guide.openenergymonitor.org/setup/daily-kwh/

pb66 · 2016-10-22T10:53:16.152Z

jrmoralesc:

2016-10-21 18:12:59.498|WARN|PHPFina.php|post_bulk_prepare() timestamp=0 older than feed starttime=1663068486 feedid=1

If the clock was out (by nearly 6 years) when the feeds were first created then although the feeds appear to update on the feeds table (data in redis/sql) the data will not be persisted or retrievable from the actual feeds (PHPfina).

You need to establish if those “older than feed starttime” faults are still occurring, if they are, you have little choice but to delete the feeds and recreate them (or wait 6 years for it to start working)

Once you get the data being saved to the feeds correctly you will have to wait for some data to collate before the MyElectric app will work fully, I cannot recall whether you need >24hrs data, or need to wait until after midnight to get a starting value for the current day, but it will not usually work instantly.

During the first 24hrs you can regularly (but not too often so as to recognize a change) check the feed size is increasing by using the “refresh feed size” on the feeds page.

If the times are now correct, that error is no longer being logged and the feed sizes are increasing, you should see the MyElectric app work fully and correctly within a day or so. Observing the graph as suggested by Glyn will also give a good indication as that may function before the MyElectric app, but will still need some data for them to work correctly.

jrmoralesc · 2016-10-22T16:42:28.889Z

Good morning gentlemen, yesterday I stop checking this isse with so much faith thinking that the solution is just thing of the counter to be increased. Today I access and finally and USED TODAY is displaying values:

Pasted image1440×900 130 KB

Thank you for your continuous support and attention, the following for my project is to add more phases, so I see I need more hardware.

I really like your product congratulations.

glyn.hudson · 2016-10-23T00:35:54.400Z

Thanks @Paul, well spotted. I had not realised this was a new (less than 24hr) system.

This is a known bug in MyElectric, I have reported it a few months ago. Hopefully, it will be an easy fix when @TrystanLea gets a chance to look Kwh Use displays zero until first 24hrs has past · Issue #15 · emoncms/app · GitHub