# Sofar ME3000SP Inverter to Pylontech battery communications

**URL:** <https://community.openenergymonitor.org/t/sofar-me3000sp-inverter-to-pylontech-battery-communications/24279>\
**Category:** Forum\
**Created:** [30 August 2023 14:17 UTC](https://community.openenergymonitor.org/t/sofar-me3000sp-inverter-to-pylontech-battery-communications/24279 "2023-08-30T14:17:18Z")\
**Posts on this page:** 2\
**Page:** 1

<div class="post-metadata">

**Author:** ![beezer](https://community.openenergymonitor.org/letter_avatar_proxy/v4/letter/b/c68b51/32.png) [@beezer](https://community.openenergymonitor.org/u/beezer)\
**Post date:** [30 August 2023 14:17 UTC](https://community.openenergymonitor.org/t/sofar-me3000sp-inverter-to-pylontech-battery-communications/24279/1 "2023-08-30T14:17:19Z")

</div>

I have a Sofar ME3000SP energy storage inverter which I’ve been using with lead acid batteries.  
I now want to change to a Pylontech battery but am confused with regard to the Canbus port which should be a 4P4C connector but is in fact an 8P8C port.  
I know the unit, which I purchased second hand, is around 6 years old & am wondering whether the connectors were changed on later models.  
Any help would be greatly appreciated.

---

<div class="post-metadata">

**Author:** ![JJC](https://community.openenergymonitor.org/letter_avatar_proxy/v4/letter/j/a9adbd/32.png) [@JJC](https://community.openenergymonitor.org/u/JJC)\
**Post date:** [31 August 2023 14:11 UTC](https://community.openenergymonitor.org/t/sofar-me3000sp-inverter-to-pylontech-battery-communications/24279/2 "2023-08-31T14:11:25Z")

</div>

Hi,

the cable you need will depend on the battery you use, the newer “C” batteries use a different cable from the older “B” and no letter batteries. You may also need to do a firmware update if you want to use a newer battery. This link should help [Sofar Solar ME3000SP Firmware Upgrade Procedure | Setfire Labs](https://www.setfirelabs.com/green-energy/sofar-solar-me3000sp-firmware-upgrade-procedure)

John
