Setup emonpi

Atle_E_Hagen · 2024-08-02T15:04:16.679Z

Just downloaded last image (emonSD-01Feb24) and burnt and installed to pi3+. Does not start, nor do the default user/ pass work, emonsd/emonsd. Any tip?

Robert.Wall · 2024-08-02T22:23:51.593Z

Welcome, Atle, to the OEM forum.

Atle_E_Hagen:

burnt

How? We have found some burning software works better, and some fails. There is a very long thread here, which might help:

Login Problems Installation

Hi All, Have a very odd problem I hope you can help with. I’ve had a look across forum posts but can’t find anything quite like it. When I try and log in via a web browser using pi/emonp12016 I’m told username does not exist. However, when I try via SSH, I successfully log in. I’m at a bit of a loss as to how to proceed. Any help will be most appreciated. Thanks, Richard

borpin · 2024-08-06T06:49:31.532Z

Atle_E_Hagen:

Does not start, nor do the default user/ pass work, emonsd/emonsd. Any tip?

When first starting, you do need to be patient as it reboots a couple of times. If you interrupt it, it will fail.

Try the burn/startup again, but go off and do something else after first powerup and see what happens