# Send http to emoncms using arduino nano + enc28j60 + ds18b20

**URL:** <https://community.openenergymonitor.org/t/send-http-to-emoncms-using-arduino-nano-enc28j60-ds18b20/3151>\
**Category:** Hardware\
**Created:** [17 February 2017 09:10 UTC](https://community.openenergymonitor.org/t/send-http-to-emoncms-using-arduino-nano-enc28j60-ds18b20/3151 "2017-02-17T09:10:11Z")\
**Posts on this page:** 2\
**Page:** 1

<div class="post-metadata">

**Author:** ![kornel72](https://community.openenergymonitor.org/user_avatar/community.openenergymonitor.org/kornel72/32/29288_2.png) [@kornel72](https://community.openenergymonitor.org/u/kornel72)\
**Post date:** [17 February 2017 09:10 UTC](https://community.openenergymonitor.org/t/send-http-to-emoncms-using-arduino-nano-enc28j60-ds18b20/3151/1 "2017-02-17T09:10:11Z")

</div>

Hello,  
I want to use this code [Arduino uno + ethernet shield | Archived Forum](https://openenergymonitor.org/emon/node/4352) and

for verifying the reported error on line:

**char line\_buf[50];**  
exit status 1  
expected ‘,’ or ‘;’ before ‘char’

**OneWire oneWire(ONE\_WIRE\_BUS);**  
exit status 1  
expected ‘,’ or ‘;’ before ‘OneWire’

(error in line **char website[] PROGMEM = “xx.xx.xx.xx”;** solved, replaced with **const char website[] PROGMEM = “xx.xx.xx.xx”;**)

Can someone help what is wrong? Or someone has a solution how to send data from more sensors DS18B20 to emoncms with Arduino + Ethernet Shield?

---

<div class="post-metadata">

**Author:** ![kornel72](https://community.openenergymonitor.org/user_avatar/community.openenergymonitor.org/kornel72/32/29288_2.png) [@kornel72](https://community.openenergymonitor.org/u/kornel72)\
**Post date:** [17 February 2017 11:08 UTC](https://community.openenergymonitor.org/t/send-http-to-emoncms-using-arduino-nano-enc28j60-ds18b20/3151/2 "2017-02-17T11:08:46Z")

</div>

Solved, I missed a semicolon in the code 👿