# Rfm69pi

**URL:** <https://community.openenergymonitor.org/t/rfm69pi/15543>\
**Category:** RFM69Pi\
**Tags:** emontx\
**Created:** [28 September 2020 19:08 UTC](https://community.openenergymonitor.org/t/rfm69pi/15543 "2020-09-28T19:08:15Z")\
**Posts on this page:** 2\
**Page:** 1

<div class="post-metadata">

**Author:** ![Kaitlyn\_Collier](https://community.openenergymonitor.org/user_avatar/community.openenergymonitor.org/kaitlyn_collier/32/12928_2.png) [@Kaitlyn\_Collier](https://community.openenergymonitor.org/u/Kaitlyn_Collier)\
**Post date:** [28 September 2020 19:08 UTC](https://community.openenergymonitor.org/t/rfm69pi/15543/1 "2020-09-28T19:08:15Z")

</div>

Hi there. I have an Arduino Uno, with the EmonTX Shield on top of it, transmitting 433MHz. I also have a Raspberry Pi 3, and the SD card from OpenEnergyMonitor. I’m wondering if there is a sample code for the Raspberry Pi, to process the data coming in from the EmonTX, and somehow display that to a user. TIA.

---

<div class="post-metadata">

**Author:** ![Robert.Wall](https://community.openenergymonitor.org/user_avatar/community.openenergymonitor.org/robert.wall/32/38246_2.png) [@Robert.Wall](https://community.openenergymonitor.org/u/Robert.Wall)\
**Post date:** [28 September 2020 20:22 UTC](https://community.openenergymonitor.org/t/rfm69pi/15543/2 "2020-09-28T20:22:53Z")

</div>

Everything you need software-wise should be on that SD card. If you’re going to connect the Arduino by wires, you need to look at this: [EmonTx V3.4 - OpenEnergyMonitor Wiki](https://wiki.openenergymonitor.org/index.php/EmonTx_V3.4#Direct_connection_emonTx_V3_.3E_Raspberry_Pi_GPIO)

If you need to use the RFM radio link, then you will need one of these from the shop: [RFM69Pi 433Mhz Raspberry Pi Base Station Transceiver - Shop | OpenEnergyMonitor](https://shop.openenergymonitor.com/rfm69pi-433mhz-raspberry-pi-base-station-transceiver/)  
to receive the transmissions. It sits on the Pi’s GPIO connector and feeds straight into the Pi.

emonCMS will then provide you with the means to record and display the data.
