# RFM2Pi interfacer apparently publishing to MQTT?

**URL:** <https://community.openenergymonitor.org/t/rfm2pi-interfacer-apparently-publishing-to-mqtt/1994>\
**Category:** Emoncms\
**Created:** [25 October 2016 22:39 UTC](https://community.openenergymonitor.org/t/rfm2pi-interfacer-apparently-publishing-to-mqtt/1994 "2016-10-25T22:39:32Z")\
**Posts on this page:** 1\
**Showing post:** 5

<div class="post-metadata">

**Author:** ![glyn.hudson](https://community.openenergymonitor.org/user_avatar/community.openenergymonitor.org/glyn.hudson/32/35003_2.png) [@glyn.hudson](https://community.openenergymonitor.org/u/glyn.hudson)\
**Post date:** [29 October 2016 12:31 UTC](https://community.openenergymonitor.org/t/rfm2pi-interfacer-apparently-publishing-to-mqtt/1994/5 "2016-10-29T12:31:09Z")

</div>

> [@Jon](#):
>
> The only thing I haven’t done is apt-get update && apt-get upgrade. I think running those commands with the MQTT update caused the issues. The MQTT update to 1.4.10 / mosquito version 1.4.10 bit me (pun intended).

If you’re running the latest emonSD (03May16), this has now been fixed. As long as you run admin \> emonpi update to pull in the latest changes it’s fine (and highly recommended to [fix Dirty Cow](https://community.openenergymonitor.org/t/dirty-cow-vulnerability/2010/11)) to update to mosquito 1.4.10 by running `sudo apt-get update && upgrade` 🙂.

The issue was Mosquito 1.4.10 now requires a log file to be created. This has now been added to rc.local which runs at boot. The `rc.local_jessieminimal` in the emonp repo `~/emonpi` is symlinked to `/etc/rc.local` on the emonSD.

> <https://github.com/openenergymonitor/emonpi/commit/71f22cdf4e52fabbf80f66686c8ac8f471c4fa41>

---

_[View the full topic](https://community.openenergymonitor.org/t/rfm2pi-interfacer-apparently-publishing-to-mqtt/1994)._