# Pulse counting RFM69PI direct connect to emonpi base

**URL:** <https://community.openenergymonitor.org/t/pulse-counting-rfm69pi-direct-connect-to-emonpi-base/5647>\
**Category:** Getting Started\
**Tags:** rfm69pi\
**Created:** [14 November 2017 02:15 UTC](https://community.openenergymonitor.org/t/pulse-counting-rfm69pi-direct-connect-to-emonpi-base/5647 "2017-11-14T02:15:40Z")\
**Posts on this page:** 2\
**Page:** 2

<div class="post-metadata">

**Author:** ![Robert.Wall](https://community.openenergymonitor.org/user_avatar/community.openenergymonitor.org/robert.wall/32/38246_2.png) [@Robert.Wall](https://community.openenergymonitor.org/u/Robert.Wall)\
**Post date:** [28 June 2018 13:15 UTC](https://community.openenergymonitor.org/t/pulse-counting-rfm69pi-direct-connect-to-emonpi-base/5647/21 "2018-06-28T13:15:08Z")

</div>

Sorry, I can’t help you here. You need an emonCMS expert to answer this.

---

<div class="post-metadata">

**Author:** ![Morgan\_Werner](https://community.openenergymonitor.org/letter_avatar_proxy/v4/letter/m/bc8723/32.png) [@Morgan\_Werner](https://community.openenergymonitor.org/u/Morgan_Werner)\
**Post date:** [2 July 2018 00:37 UTC](https://community.openenergymonitor.org/t/pulse-counting-rfm69pi-direct-connect-to-emonpi-base/5647/22 "2018-07-02T00:37:41Z")

</div>

Think I am going in the right direction, I have set the emonpi and LED board at its permanent  
location now just need to gather data for some checking.

Question : After moving and setting the machine had to power down a couple of times, now  
have some gaps in my data. For instance, my WH accum feed quality is at 54% but rising steadily should I leave it alone or ? Is there a reset process is should do?

Cheers

Morgan

[Previous page](https://community.openenergymonitor.org/t/pulse-counting-rfm69pi-direct-connect-to-emonpi-base/5647.md?page=1)