# Pulse count not correctly set up, need advice **URL:** \ **Category:** emonPi\ **Tags:** emoncms\ **Created:** [25 December 2019 20:04 UTC](https://community.openenergymonitor.org/t/pulse-count-not-correctly-set-up-need-advice/12822 "2019-12-25T20:04:00Z")\ **Posts on this page:** 1\ **Showing post:** 20
**Author:** ![borpin](https://community.openenergymonitor.org/user_avatar/community.openenergymonitor.org/borpin/32/193_2.png) [@borpin](https://community.openenergymonitor.org/u/borpin)\ **Post date:** [14 July 2020 09:22 UTC](https://community.openenergymonitor.org/t/pulse-count-not-correctly-set-up-need-advice/12822/20 "2020-07-14T09:22:46Z")
> [@Ardmhacha24](#): > > is that the way you would recommend getting both feeds? That is what I do. On graphing, looking at short periods of time can be odd. Also, unless both Feeds started at exactly the same time put one on left and one on right but **check** the scales are the same else you get some odd views. This is 2 feeds (pulse and CT) started about the same time. ![image](https://community.openenergymonitor.org/uploads/default/original/2X/c/c1f58c71674dca2f201cae7ba35cce51e83ff600.png) This is 2 feeds started at different times - note the scale is different. ![image](https://community.openenergymonitor.org/uploads/default/original/2X/0/042a2b9657e0bc4c76383d89540dfec30cb04d9a.png) If I force the scales to be the same… ![image](https://community.openenergymonitor.org/uploads/default/original/2X/e/e4e7583c8c2edc88d8d5bef6e9785200a26e2ae4.png) You can see the CT over reading. If you look at the stats… ![image](https://community.openenergymonitor.org/uploads/default/original/2X/b/b7aea2303e9f73cc2282d25abfc232a26936f5d9.png) You can see the ‘Diff’ that is a the measured kWh in the frame. Missing data on the pulse will be when the rate of change means I do not get a pulse within the 10s window. --- _[View the full topic](https://community.openenergymonitor.org/t/pulse-count-not-correctly-set-up-need-advice/12822)._