# Proxmox CT Ubuntu 22.04 Installation

**URL:** <https://community.openenergymonitor.org/t/proxmox-ct-ubuntu-22-04-installation/21902>\
**Category:** Installation\
**Created:** [19 November 2022 15:28 UTC](https://community.openenergymonitor.org/t/proxmox-ct-ubuntu-22-04-installation/21902 "2022-11-19T15:28:23Z")\
**Posts on this page:** 1\
**Showing post:** 3

<div class="post-metadata">

**Author:** ![borpin](https://community.openenergymonitor.org/user_avatar/community.openenergymonitor.org/borpin/32/193_2.png) [@borpin](https://community.openenergymonitor.org/u/borpin)\
**Post date:** [20 November 2022 10:21 UTC](https://community.openenergymonitor.org/t/proxmox-ct-ubuntu-22-04-installation/21902/3 "2022-11-20T10:21:25Z")

</div>

I dug out the other thread. Note the helper scripts I recently found 🙂

> [@I (re)mounted /var/opt/emoncms to an usb stick attached to my pi. Should i change certain things?](https://community.openenergymonitor.org/t/i-re-mounted-var-opt-emoncms-to-an-usb-stick-attached-to-my-pi-should-i-change-certain-things/21655/6):
>
> I was lucky I had a couple of old ones here and some spare memory chips. If you are going to use it, I’d just install PVE, then run emoncms in an LXC container. Some one pointed me to this guy recently - [Proxmox Helper Scripts | Proxmox Scripts For Home Automation](https://tteck.github.io/Proxmox/) for easy to use scripts - install Ubuntu then use the OEM emonscript to install emoncms. Running PVE will draw much less power than Windows (even if in a container or VM). Spinning Discs draw a surprising amount of power as well.

---

_[View the full topic](https://community.openenergymonitor.org/t/proxmox-ct-ubuntu-22-04-installation/21902)._