# Possible to add power used during 1 hour to MySolar App?

**URL:** <https://community.openenergymonitor.org/t/possible-to-add-power-used-during-1-hour-to-mysolar-app/1333>\
**Category:** Emoncms\
**Tags:** mysolar\
**Created:** [23 August 2016 00:40 UTC](https://community.openenergymonitor.org/t/possible-to-add-power-used-during-1-hour-to-mysolar-app/1333 "2016-08-23T00:40:32Z")\
**Posts on this page:** 1\
**Page:** 1

<div class="post-metadata">

**Author:** ![kevin](https://community.openenergymonitor.org/letter_avatar_proxy/v4/letter/k/2acd7d/32.png) [@kevin](https://community.openenergymonitor.org/u/kevin)\
**Post date:** [23 August 2016 00:40 UTC](https://community.openenergymonitor.org/t/possible-to-add-power-used-during-1-hour-to-mysolar-app/1333/1 "2016-08-23T00:40:32Z")

</div>

I’ve been using EMONCMS V9.31 on a Pi3 for a while now and it works very well. Recently I’ve changed power companies and my new one gives me one hour of low priced off peak electricity per day which I can change the time of. Is there any way of logging this separately and incorporating it into MySolarPV so I have: Solar Generation in KW Grid Power Rate1 in KW Grid Power Rate2 in KW Percentage of Grid Power at Rate2 vs Rate1 The Pi also runs Openhab so I can set a variable via MQTT when the lower rate is active. I’d rather use Openhab to show the rate2 hour instead of a scheduler inside EMONCMS if possible as I change the hour via Openhab depending on when is the best time to run domestic appliances, and how much the suns been out.