OpenEVSE WiFi V1 ESP32 schematic

nick1 · 2023-05-07T16:13:52.796Z

Is their a schematic for this Wi-Fi board, I’ve not been able to find one anywhere?

Guillaume_S · 2023-05-08T09:24:54.662Z

The Qwik port is I2C ( check for Qwik i2c pinout)
The other ones are the same as V1 module, i.e led port and serial.

You also have a 16mb flash on this board.

nick1 · 2023-05-08T10:15:15.717Z

Thank you, yes I knew all that but I am looking for a schematic. I can’t find one for the V1 either, as I realised the only difference looks to be the qwiic and ic.

Guillaume_S · 2023-05-08T12:47:04.816Z

this ? GitHub - OpenEVSE/ESP32_hardware: OpenEVSE network communications controllers based on the ESP32 Module.

nick1 · 2023-05-08T13:03:05.249Z

Thank you, I couldn’t find it.

nick1 · 2023-05-08T22:49:42.405Z

Sorted.