OpenEVSE PV Divert maximum current

Csaba · 2021-03-19T08:08:05.057Z

Hi.
Second day of using the ECO - PV Divert mode.
I saw that the max. current is 12A even if the available current is over 15A.
It doesn’t matter, if I change the max. current, manually to 16A, the OpenEVSE will change it dinamically after a few seconds, but it looks like never above 12A, in fact in the user interface “Setup” > “Max Current” will be changed only to a smaller value and will never rise back again.
Am I doing something wrong or the car, limit the charge rate, temporary to 12A? (Hyundai Kona 64kWh, with only 7.4kW AC charger onboard).
Thanks!

available_current_15A993×911 44.5 KB

current_change969×859 42.2 KB

max_current_12A1150×846 60.3 KB

Csaba · 2021-03-21T10:59:47.234Z

It looks like this issue was solved by power cycling the OpenEVSE (3.3.2 and 7.0.2) ON/OFF with the Eco - PV Divert mode Enabled.
Now even the “Setup > Max Current” remaining on the manually set value (no more drifting).