# Open source heat pump data **URL:** \ **Category:** Labs\ **Created:** [23 February 2025 14:30 UTC](https://community.openenergymonitor.org/t/open-source-heat-pump-data/28092 "2025-02-23T14:30:06Z")\ **Posts on this page:** 6\ **Page:** 1
**Author:** ![goodcopbadcop](https://community.openenergymonitor.org/letter_avatar_proxy/v4/letter/g/ecb155/32.png) [@goodcopbadcop](https://community.openenergymonitor.org/u/goodcopbadcop)\ **Post date:** [23 February 2025 14:30 UTC](https://community.openenergymonitor.org/t/open-source-heat-pump-data/28092/1 "2025-02-23T14:30:06Z")
Afternoon! Not sure if this is the right place for this (please nudge me in the right direction if not!). I’ve spent the last 7 or 8 years working in energy, specifically optimisation of energy assets (including heat pumps). I’m looking to start a few hobby projects in this area building some stuff I think could be useful here, but i’m missing open source heat pump data needed to do some fun data science on! Ideally i’d have half hourly (or less!) datasets of: - input power - output power (or instantaneous COP) - flow temperature - return temperature - isDefrost - any other relevant control status of the heat pump Can anyone point me to this? Thanks, Tom ---
**Author:** ![goodcopbadcop](https://community.openenergymonitor.org/letter_avatar_proxy/v4/letter/g/ecb155/32.png) [@goodcopbadcop](https://community.openenergymonitor.org/u/goodcopbadcop)\ **Post date:** [23 February 2025 14:59 UTC](https://community.openenergymonitor.org/t/open-source-heat-pump-data/28092/2 "2025-02-23T14:59:48Z")
Additionally, if there is any information within the home with regards to room temperature that’d be great too, but not absolutely required. ---
**Author:** ![goodcopbadcop](https://community.openenergymonitor.org/letter_avatar_proxy/v4/letter/g/ecb155/32.png) [@goodcopbadcop](https://community.openenergymonitor.org/u/goodcopbadcop)\ **Post date:** [23 February 2025 15:05 UTC](https://community.openenergymonitor.org/t/open-source-heat-pump-data/28092/3 "2025-02-23T15:05:52Z")
I can see heatpumpmonitor have a lot of this but can’t see an easy download button. Probably being stupid. Would be good to discuss the Heat Demand Tool on here too; I think my stuff could feed into this quite neatly! [Emoncms - app view](https://emoncms.org/app/view?name=MyHeatpump&readkey=bbd1cd04728bd8c9f7acfb2ee51936d2) ---
**Author:** ![goodcopbadcop](https://community.openenergymonitor.org/letter_avatar_proxy/v4/letter/g/ecb155/32.png) [@goodcopbadcop](https://community.openenergymonitor.org/u/goodcopbadcop)\ **Post date:** [23 February 2025 15:14 UTC](https://community.openenergymonitor.org/t/open-source-heat-pump-data/28092/4 "2025-02-23T15:14:57Z")
Would also be good to get flow rate and DHW status too! ---
**Author:** ![TrystanLea](https://community.openenergymonitor.org/user_avatar/community.openenergymonitor.org/trystanlea/32/31_2.png) [@TrystanLea](https://community.openenergymonitor.org/u/TrystanLea)\ **Post date:** [28 February 2025 12:55 UTC](https://community.openenergymonitor.org/t/open-source-heat-pump-data/28092/5 "2025-02-28T12:55:39Z")
Hello @goodcopbadcop [HeatpumpMonitor.org](http://HeatpumpMonitor.org) has an API that provides access to the underlying data, see: [https://heatpumpmonitor.org/api-helper](https://heatpumpmonitor.org/api-helper). For the dashboard link that you shared, you can get a list of feeds used in the app with: [https://emoncms.org/app/getconfig?name=MyHeatpump&readkey=bbd1cd04728bd8c9f7acfb2ee51936d2](https://emoncms.org/app/getconfig?name=MyHeatpump&readkey=bbd1cd04728bd8c9f7acfb2ee51936d2) ```auto { "id": "4814", "userid": "47964", "app": "myheatpump", "name": "MyHeatpump", "public": "1", "config": { "heatpump_heat": "485961", "heatpump_heat_kwh": "485954", "heatpump_flowT": "485958", "heatpump_returnT": "485959", "heatpump_outsideT": "485953", "heatpump_roomT": "485955", "heatpump_flowrate": "485960", "heatpump_elec": "486066", "heatpump_elec_kwh": "507748", "start_date": "1708430415", "public": true, "heatpump_dhw": "507732", "enable_process_daily": true } ``` Then it’s possible to access say half hourly kWh consumption data with the [emoncms.org](http://emoncms.org) feed API: ``` https://emoncms.org/feed/data.json?id=507748&start=27-02-2025Z00:00:00&end=28-02-2025Z00:00:00&interval=1800&average=0&timeformat=iso8601&skipmissing=0&limitinterval=0&delta=1&apikey=bbd1cd04728bd8c9f7acfb2ee51936d2 ``` Result: ```auto [ [ "2025-02-27T00:00:00+00:00", 0.28759765625 ], [ "2025-02-27T00:30:00+00:00", 0.28759765625 ], [ "2025-02-27T01:00:00+00:00", 0.28662109375 ], [ "2025-02-27T01:30:00+00:00", 0.287109375 ], [ "2025-02-27T02:00:00+00:00", 0.2861328125 ], [ "2025-02-27T02:30:00+00:00", 0.2861328125 ], [ "2025-02-27T03:00:00+00:00", 0.28759765625 ], [ "2025-02-27T03:30:00+00:00", 0.28564453125 ], [ "2025-02-27T04:00:00+00:00", 0.28662109375 ], [ "2025-02-27T04:30:00+00:00", 0.2861328125 ], [ "2025-02-27T05:00:00+00:00", 0.28662109375 ], [ "2025-02-27T05:30:00+00:00", 0.28564453125 ], [ "2025-02-27T06:00:00+00:00", 0.2861328125 ], [ "2025-02-27T06:30:00+00:00", 0.28564453125 ], [ "2025-02-27T07:00:00+00:00", 0.28662109375 ], [ "2025-02-27T07:30:00+00:00", 0.27587890625 ], [ "2025-02-27T08:00:00+00:00", 0.27587890625 ], [ "2025-02-27T08:30:00+00:00", 0.27587890625 ], [ "2025-02-27T09:00:00+00:00", 0.27734375 ], [ "2025-02-27T09:30:00+00:00", 0.27783203125 ], [ "2025-02-27T10:00:00+00:00", 0.27783203125 ], [ "2025-02-27T10:30:00+00:00", 0.26806640625 ], [ "2025-02-27T11:00:00+00:00", 0.26123046875 ], [ "2025-02-27T11:30:00+00:00", 0.26171875 ], [ "2025-02-27T12:00:00+00:00", 0.25146484375 ], [ "2025-02-27T12:30:00+00:00", 0.26123046875 ], [ "2025-02-27T13:00:00+00:00", 0.650390625 ], [ "2025-02-27T13:30:00+00:00", 0.7001953125 ], [ "2025-02-27T14:00:00+00:00", 0.4208984375 ], [ "2025-02-27T14:30:00+00:00", 0.275390625 ], [ "2025-02-27T15:00:00+00:00", 0.26806640625 ], [ "2025-02-27T15:30:00+00:00", 0.24609375 ], [ "2025-02-27T16:00:00+00:00", 0.2490234375 ], [ "2025-02-27T16:30:00+00:00", 0.25732421875 ], [ "2025-02-27T17:00:00+00:00", 0.26220703125 ], [ "2025-02-27T17:30:00+00:00", 0.263671875 ], [ "2025-02-27T18:00:00+00:00", 0.267578125 ], [ "2025-02-27T18:30:00+00:00", 0.27099609375 ], [ "2025-02-27T19:00:00+00:00", 0.27783203125 ], [ "2025-02-27T19:30:00+00:00", 0.27783203125 ], [ "2025-02-27T20:00:00+00:00", 0.2783203125 ], [ "2025-02-27T20:30:00+00:00", 0.27734375 ], [ "2025-02-27T21:00:00+00:00", 0.2783203125 ], [ "2025-02-27T21:30:00+00:00", 0.2861328125 ], [ "2025-02-27T22:00:00+00:00", 0.28662109375 ], [ "2025-02-27T22:30:00+00:00", 0.287109375 ], [ "2025-02-27T23:00:00+00:00", 0.287109375 ], [ "2025-02-27T23:30:00+00:00", 0.287109375 ], [ "2025-02-28T00:00:00+00:00", 0.28564453125 ] ] ``` You can access data all the way down to 10s data, if it’s recorded at that resolution. ---
**Author:** ![goodcopbadcop](https://community.openenergymonitor.org/letter_avatar_proxy/v4/letter/g/ecb155/32.png) [@goodcopbadcop](https://community.openenergymonitor.org/u/goodcopbadcop)\ **Post date:** [1 March 2025 21:13 UTC](https://community.openenergymonitor.org/t/open-source-heat-pump-data/28092/6 "2025-03-01T21:13:01Z")
Thanks, i’ll take a look and get back with any questions/progress!