# MQTT broadcast to MQTT broker

**URL:** <https://community.openenergymonitor.org/t/mqtt-broadcast-to-mqtt-broker/1060>\
**Category:** WiFi Relay\
**Created:** [22 July 2016 23:06 UTC](https://community.openenergymonitor.org/t/mqtt-broadcast-to-mqtt-broker/1060 "2016-07-22T23:06:10Z")\
**Posts on this page:** 3\
**Page:** 1

<div class="post-metadata">

**Author:** ![brunovg](https://community.openenergymonitor.org/letter_avatar_proxy/v4/letter/b/c5a1d2/32.png) [@brunovg](https://community.openenergymonitor.org/u/brunovg)\
**Post date:** [22 July 2016 23:06 UTC](https://community.openenergymonitor.org/t/mqtt-broadcast-to-mqtt-broker/1060/1 "2016-07-22T23:06:10Z")

</div>

Hi there.  
Just bought a MQTT Wi-Fi Relay, and I have a question concerning the MQTT broadcast to a MQTT broker.  
I installed a Mosquitto broker in the same network, but MQTT Wi-Fi Relay won’t publish anything. I already tried to use a iPhone app to simulate a publish, and everything worked fine.

Do I miss something?  
Do I have a bad component?  
HTTP access to read values works fine, only MQTT broadcast is not working properly.

---

<div class="post-metadata">

**Author:** ![brunovg](https://community.openenergymonitor.org/letter_avatar_proxy/v4/letter/b/c5a1d2/32.png) [@brunovg](https://community.openenergymonitor.org/u/brunovg)\
**Post date:** [22 July 2016 23:08 UTC](https://community.openenergymonitor.org/t/mqtt-broadcast-to-mqtt-broker/1060/2 "2016-07-22T23:08:50Z")

</div>

I forget to mention, that I am using the last version of the Mosquitto broker v3.1

---

<div class="post-metadata">

**Author:** ![brunovg](https://community.openenergymonitor.org/letter_avatar_proxy/v4/letter/b/c5a1d2/32.png) [@brunovg](https://community.openenergymonitor.org/u/brunovg)\
**Post date:** [22 July 2016 23:21 UTC](https://community.openenergymonitor.org/t/mqtt-broadcast-to-mqtt-broker/1060/3 "2016-07-22T23:21:23Z")

</div>

Just solved by a simple restart 😉  
Thanks anyway 😀