# Login Problems

**URL:** <https://community.openenergymonitor.org/t/login-problems/23088>\
**Category:** Installation\
**Tags:** emoncms\
**Created:** [9 March 2023 17:29 UTC](https://community.openenergymonitor.org/t/login-problems/23088 "2023-03-09T17:29:36Z")\
**Posts on this page:** 1\
**Showing post:** 27

<div class="post-metadata">

**Author:** ![Bill.Thomson](https://community.openenergymonitor.org/user_avatar/community.openenergymonitor.org/bill.thomson/32/1834_2.png) [@Bill.Thomson](https://community.openenergymonitor.org/u/Bill.Thomson)\
**Post date:** [3 August 2024 03:38 UTC](https://community.openenergymonitor.org/t/login-problems/23088/27 "2024-08-03T03:38:18Z")

</div>

WRT RasPi Imager vs Balena Etcher, this _might_ be worth a read:

> [@New clean build in a 2016 Pi 3B unit - Services won't start (10Nov22 image)](https://community.openenergymonitor.org/t/new-clean-build-in-a-2016-pi-3b-unit-services-wont-start-10nov22-image/23855/26):
>
> After a few days of writing/re-writing drive images, it appears the solution to the original problem is don’t change the user name if you’re using the Raspberry Pi Imager. The user name is pi and must not be changed. That’s why Etcher works. i.e. there’s no way to change the user name when writing the image with Etcher. It’s OK to change the other RasPi Imager options: Enable SSH SSH password User password Configure wireless LAN Locale settings

---

_[View the full topic](https://community.openenergymonitor.org/t/login-problems/23088)._