Kamstrup Multical 403 Erratic flow readings

[JustinUK (Justin Small)]

having a few issues on a newly installed heatpump with this

Odd behaviour when hitting strong man on Daikin Hot Water Boost

I noticed something odd. Hit the strong man on Daikin app to get hot water tank up to 48 degrees while agile prices were on the cheap. App was just stuck saying Heating 48 degrees though Draw from electric was then showing as 5kW plus going to the household then open energy monitor was only showing 2.7kW draw and COP 0, dropping further below zero too SCOP was down to 2.3 Is this a fault? Also how often do people top up their hot water tanks, seems I’m topping up daily as it drops from Comf…

Questions around Open Energy Monitor and pulling it into Home Assistant

Forgive me if these seem silly questions but I am really new to all this and I am no heating engineer. Got to start somewhere. [Snag_4db731e] Over Each Time Period… What is my… INPUT heating used in kWh (Radiators) OUTPUT heating used in kWh (Radiators) What is the COP for the Radiators INPUT heating used in kWh (Hot Water Tank) OUTPUT heating used in kWh (Hot Water Tank) What is the COP for the Hot Water Tank What is my combined COP Are there two ways to heat the HW tank / Radiators…

https://emoncms.org/app/view?name=MyHeatpump&readkey=bd99c02f463c065f0f7184a5c2eccadc