# Irregular tx data receipt

**URL:** <https://community.openenergymonitor.org/t/irregular-tx-data-receipt/16601>\
**Category:** emonTx\
**Tags:** emoncms\
**Created:** [20 January 2021 19:54 UTC](https://community.openenergymonitor.org/t/irregular-tx-data-receipt/16601 "2021-01-20T19:54:55Z")\
**Posts on this page:** 1\
**Showing post:** 11

<div class="post-metadata">

**Author:** ![borpin](https://community.openenergymonitor.org/user_avatar/community.openenergymonitor.org/borpin/32/193_2.png) [@borpin](https://community.openenergymonitor.org/u/borpin)\
**Post date:** [22 January 2021 18:47 UTC](https://community.openenergymonitor.org/t/irregular-tx-data-receipt/16601/11 "2021-01-22T18:47:22Z")

</div>

> [@gadgetbazza](#):
>
> Is there a guide for doing this with multiple emonTX units being connected via serial to a single Pi?

Not a formal one but a few here.

With 3, I’d be inclined to get a TTL to USB converter and plug them into the USB port of the Pi.

> [@Emonpi - multiple serial-usb](https://community.openenergymonitor.org/t/emonpi-multiple-serial-usb/5327):
>
> Can i get 2 (or more) inputs via a serial-usb connected to the emonPi? Now i have one connected via the [RFM2Pi] in [intercaces] by changing the comport and baudrate. I would like to connect 2nd arduino via serial.

> [@EmonTX dropouts](https://community.openenergymonitor.org/t/emontx-dropouts/16028/23):
>
> Hi Paul Thanks for the cable suggestion. Thought I would document here (for when I inevitably break something and want to refer back…) what I did to “wire” my two emonTx’s to the emonPi: Get two of the cables you linked above, 2x male-female USB extenders, and connect straight to the UART ports of the emonTx’s and USB ports of the emonPi Check they show up: pi@emonpi:~ $ lsusb Bus 001 Device 005: ID 0403:6001 Future Technology Devices International, Ltd FT232 Serial (UART) IC Bus 001 D…

> **[FTDI Serial TTL-232 USB Cable](https://thepihut.com/products/ftdi-serial-ttl-232-usb-cable)**
>
> Just about all electronics use TTL serial for debugging, bootloading, programming, serial output, etc. But it's rare for a computer to have a serial port anymore. This is a USB to TTL serial cable, with a FTDI FT232RL usb/serial chip embedded in the...

---

_[View the full topic](https://community.openenergymonitor.org/t/irregular-tx-data-receipt/16601)._
