IoTaWatt wont start

Janus · 2018-02-28T07:48:31.212Z

Hi Guys!

I accidentally formatted my SD card and now it wont boot…
the log says:

Serial Initialized
No clock yet: SPI started.
No clock yet: SD initialized.
2/28/18 07:44:34 Real Time Clock is running. Unix time: 1519803874
2/28/18 07:44:34 Version: 02_02_30
2/28/18 07:44:34 Reset reason: External System
2/28/18 07:44:34 Trace: 130,42322,26118,28029,23220,50324,49425,51159,45819,41344,54639,60156,4391,29491,31789,7365,34470,64444,54994,5001,8854,53348,18748,39541,11524,50619,33037,36402,25744,25758,37572,20444
2/28/18 07:44:34 ESP8266 ChipID:192095
2/28/18 07:44:34 Config file open failed.
2/28/18 07:44:34 Configuration failed
2/28/18 07:44:34 Program halted.

Any idea to get the configuration on the SD card again?
Thank You in Advance

overeasy · 2018-02-28T12:21:58.787Z

Janus:

Any idea to get the configuration on the SD card again?

You need seven files in the SD card root directory. You can find the latest versions in the IoTaWatt git at

GitHub

GitHub - boblemaire/IoTaWatt: IoTaWatt Open WiFi Electric Energy Monitor

IoTaWatt Open WiFi Electric Energy Monitor. Contribute to boblemaire/IoTaWatt development by creating an account on GitHub.

There is a directory called SD that contains the files. Download the git and copy the files from the directory SD to your SD card. Should boot up fine after that.