Graph ID Missing, Buttons not Working V10.0.0

emrys · 2019-05-19T22:12:32.377Z

New issue created:

graph buttons not responding in embed

opened 10:09PM - 19 May 19 UTC

closed 12:16AM - 21 May 19 UTC

More info on the community forum: https://community.openenergymonitor.org/t/grap…h-id-missing-buttons-not-working-v10-0-0/10953/3 thanks neil and @borpin

borpin · 2019-05-20T10:35:15.935Z

@emrys, did you note the other issue re the Graph ID not being available?

emrys · 2019-05-20T10:42:05.647Z

@borpin I wasn’t too sure where to add the Graph ID ?.. where should it be available?

borpin · 2019-05-20T13:02:08.374Z

emrys:

I wasn’t too sure where to add the Graph ID

@emrys I think the thing is that it is never shown so it is not possible to know what the ID is. Under the graph selection boxes it says ‘graph ID not available’. I am guess ing it should be shown here what the ID of the selected graph is.

emrys · 2019-05-20T13:18:44.515Z

borpin:

Under the graph selection boxes it says ‘graph ID not available’

I’m not seeing a “graph section” in the admin/view page on my laptop? I’ll test it on a raspberry pi tomorrow…

this is what is listed on my admin page (no graphs section):

Server Information

Services

emonhub :- Active Running
mqtt_input :- Inactive Dead
redis-server :- Active Running
mosquitto :- Active Running

Emoncms

Version :- 10.0.2-beta
Modules :- Administration | App v2.0.0 | Backup v2.0.0 | EmonHub Config v2.0.0 | Dashboard v2.0.1 | DemandShaper v1.0.0 | Device v2.0.0 | EventProcesses | Feed | Find v1.0.0 | Graph v2.0.0 | Group v2.0.0 | Input | CoreProcess | RemoteAccess v1.0.0 | Schedule | sync | Time | User | Visualisation | WiFi v2.0.0
Git :-
- URL :- git@github.com:emrysr/emoncms.git
- Branch :- master
- Describe :- 10.0.0-10-gf12522c0

Server

OS :- Linux 4.15.0-47-generic
Host :- emrys-xps-15-9530 | emrys-XPS-15-9530 | (127.0.0.1)
Date :- 2019-05-20 14:14:10 BST
Uptime :- 14:14:10 up 4 days, 4:24, 1 user, load average: 1.49, 1.47, 1.46

Memory

RAM :- Used: 57.48%
- Total :- 7.7 GB
- Used :- 4.42 GB
- Free :- 3.27 GB
Swap :- Used: 25.34%
- Total :- 8 GB
- Used :- 2.03 GB
- Free :- 5.97 GB

Disk

/ :- Used: 9.23%
- Total :- 468.45 GB
- Used :- 43.24 GB
- Free :- 401.35 GB

HTTP

Server :- Apache/2.4.29 (Ubuntu) HTTP/1.1 CGI/1.1 80

MySQL

Version :- 5.7.26-0ubuntu0.18.04.1
Host :- localhost:6379 (127.0.0.1)
Date :- 2019-05-20 14:14:10 (UTC 01:00‌)
Stats :- Uptime: 361486 Threads: 1 Questions: 110349 Slow queries: 0 Opens: 452 Flush tables: 1 Open tables: 445 Queries per second avg: 0.305

Redis

Version :- 4.0.9
Host :- localhost:6379
Size :- 90 keys (842.99K)
Uptime :- 4 days

MQTT Server

Version :- Mosquitto 1.4.15
Host :- localhost:1883 (127.0.0.1)

PHP

Version :- 7.2.17-0ubuntu0.18.04.1 (Zend Version 3.2.0)
Modules :- apache2handler | calendar v7.2.17-0ubuntu0.18.04.1 | Core v7.2.17-0ubuntu0.18.04.1 | ctype v7.2.17-0ubuntu0.18.04.1 | curl v7.2.17-0ubuntu0.18.04.1 | date v7.2.17-0ubuntu0.18.04.1 | dom v20031129 | exif v7.2.17-0ubuntu0.18.04.1 | fileinfo v1.0.5 | filter v7.2.17-0ubuntu0.18.04.1 | ftp v7.2.17-0ubuntu0.18.04.1 | gettext v7.2.17-0ubuntu0.18.04.1 | hash v1.0 | iconv v7.2.17-0ubuntu0.18.04.1 | json v1.6.0 | libxml v7.2.17-0ubuntu0.18.04.1 | mbstring v7.2.17-0ubuntu0.18.04.1 | mosquitto v0.4.0 | mysqli v7.2.17-0ubuntu0.18.04.1 | mysqlnd vmysqlnd 5.0.12-dev - 20150407 - $Id: 3591daad22de08524295e1bd073aceeff11e6579 $ | openssl v7.2.17-0ubuntu0.18.04.1 | pcre v7.2.17-0ubuntu0.18.04.1 | PDO v7.2.17-0ubuntu0.18.04.1 | pdo_mysql v7.2.17-0ubuntu0.18.04.1 | pdo_sqlite v7.2.17-0ubuntu0.18.04.1 | Phar v2.0.2 | posix v7.2.17-0ubuntu0.18.04.1 | readline v7.2.17-0ubuntu0.18.04.1 | redis v4.0.2 | Reflection v7.2.17-0ubuntu0.18.04.1 | session v7.2.17-0ubuntu0.18.04.1 | shmop v7.2.17-0ubuntu0.18.04.1 | SimpleXML v7.2.17-0ubuntu0.18.04.1 | sockets v7.2.17-0ubuntu0.18.04.1 | sodium v7.2.17-0ubuntu0.18.04.1 | SPL v7.2.17-0ubuntu0.18.04.1 | sqlite3 v7.2.17-0ubuntu0.18.04.1 | standard v7.2.17-0ubuntu0.18.04.1 | sysvmsg v7.2.17-0ubuntu0.18.04.1 | sysvsem v7.2.17-0ubuntu0.18.04.1 | sysvshm v7.2.17-0ubuntu0.18.04.1 | tokenizer v7.2.17-0ubuntu0.18.04.1 | wddx v7.2.17-0ubuntu0.18.04.1 | xml v7.2.17-0ubuntu0.18.04.1 | xmlreader v7.2.17-0ubuntu0.18.04.1 | xmlwriter v7.2.17-0ubuntu0.18.04.1 | xsl v7.2.17-0ubuntu0.18.04.1 | Zend OPcache v7.2.17-0ubuntu0.18.04.1 | zip v1.15.4 | zlib v7.2.17-0ubuntu0.18.04.1

Client Information

HTTP

Browser :- Mozilla/5.0 (X11; Ubuntu; Linux x86_64; rv:66.0) Gecko/20100101 Firefox/66.0
Language :- cy,en-GB;q=0.8,en;q=0.5,es;q=0.3

Window

Size :- 1116 x 744

Screen

Resolution :- 1600 x 900

Neil · 2019-05-20T14:19:48.194Z

Hi,

The graph ID used to be displayed where it currently says 'Selected graph id: None selected"

51%20AM868×702 68.9 KB

emrys · 2019-05-20T17:56:19.537Z

thanks @Neil - i’ve created an issue on github regarding this

github.com/emoncms/graph

graph id not shown

opened 05:55PM - 20 May 19 UTC

closed 12:14AM - 21 May 19 UTC

emrysr

![delwedd](https://user-images.githubusercontent.com/1466013/58041744-c4af9a00-7…b30-11e9-9b04-6bec7fcf38d7.png)

emrys · 2019-05-20T19:14:22.787Z

github.com/emoncms/graph

added all graph id to sidebar dropdown

emoncms:master ← emrysr:feature/issue-88-show-graph-id

opened 07:13PM - 20 May 19 UTC

emrysr

+8 -5

fix #88 showing selected graph id removed unwanted console.log() ![delwedd…](https://user-images.githubusercontent.com/1466013/58045896-bfa41800-7b3b-11e9-84e8-650afd16906f.png)

emrys · 2019-05-20T19:20:13.537Z

I’ve added the graph id next to the dropdown names in the above pull request

delwedd828×730 30.3 KB

when a graph is selected the “Selected graph id” box is changed to show the currently selected graph id:

delwedd978×524 49.2 KB

thanks @neil and @borpin for the help

glyn.hudson · 2019-05-21T00:17:10.601Z

Thanks guys, PR’s have been merged into master

github.com/emoncms/graph

added all graph id to sidebar dropdown

emoncms:master ← emrysr:feature/issue-88-show-graph-id

opened 07:13PM - 20 May 19 UTC

emrysr

+8 -5

fix #88 showing selected graph id removed unwanted console.log() ![delwedd…](https://user-images.githubusercontent.com/1466013/58045896-bfa41800-7b3b-11e9-84e8-650afd16906f.png)

github.com/emoncms/graph

graph id not shown

opened 05:55PM - 20 May 19 UTC

closed 12:14AM - 21 May 19 UTC

emrysr

![delwedd](https://user-images.githubusercontent.com/1466013/58041744-c4af9a00-7…b30-11e9-9b04-6bec7fcf38d7.png)

github.com/emoncms/graph

corrected the time window attribute on the <button>

emoncms:master ← emrysr:fix/issue-86-embed-graph-buttons

opened 10:17PM - 19 May 19 UTC

emrysr

+4 -4

the navigation buttons now work as expected on embedded graphs

Please confirm the issues have been fixed

borpin · 2019-05-21T06:49:31.918Z

glyn.hudson:

Please confirm the issues have been fixed

@Neil, if you want to test, you will need to switch to the master branch? You OK with that?

Neil · 2019-05-21T11:02:57.258Z

My system is not critical (yet) so I’ll probably be OK with switching, but I don’t know how to switch to master. Please let me know how (if not too involved) and I’ll test.

Thanks Brian and Emrys, what a great and fast response.

Neil

borpin · 2019-05-21T11:41:43.971Z

SSH into your system

cd /var/www/emoncms/
git pull
git checkout master
git pull

On testing this I found I needed the second git pull (to my surprise - need to investigate).

As and when these changes get pushed to the stable branch, you can do the same but with

git checkout stable

HTH

Neil · 2019-05-21T13:22:05.939Z

I did this:

cd /var/www/emoncms/
git pull
git checkout master
git pull

EmonCMS version number changed from 10.0.1 (Stable) to 10.0.2 (beta).

I tested the graph buttons in an EmonCMS dashboard and in a node-RED embedded graph. I found the same behavior - buttons not working.

I checked for the graph ID in the graph module and that is still not visible (…same as before).

I rebooted and tested again but remains as described above.

Forgive me for leading a sheltered life, but what does HTH mean?

Server Information

Services

emonhub :- Active Running
emoncms_mqtt :- Active Running
feedwriter :- Active Running - sleep 60s 64 feed points pending write
service-runner :- Active Running
emonPiLCD :- Active Running
redis-server :- Active Running
mosquitto :- Active Running

Emoncms

Version :- low-write 10.0.2-beta
Modules :- Administration | App v2.0.0 | Backup v1.1.6 | EmonHub Config v2.0.0 | Dashboard v2.0.1 | Device v2.0.0 | EventProcesses | Feed | Graph v2.0.0 | Input | Postprocess v2.0.0 | CoreProcess | remoteaccess | Schedule | Network Setup v1.0.0 | sync | Time | User | Visualisation | WiFi v2.0.0
Git :-
- URL :- GitHub - emoncms/emoncms: Web-app for processing, logging and visualising energy, temperature and other environmental data
- Branch :- * master
- Describe :- 10.0.0-11-ge1589990

Server

OS :- Linux 4.14.71-v7+
Host :- emonpi | emonpi | (192.168.1.11)
Date :- 2019-05-21 09:14:34 EDT
Uptime :- 09:14:34 up 10 min, 1 user, load average: 0.21, 0.19, 0.13

Memory

RAM :- Used: 23.77%
- Total :- 976.74 MB
- Used :- 232.18 MB
- Free :- 744.56 MB
Swap :- Used: 0.00%
- Total :- 100 MB
- Used :- 0 B
- Free :- 100 MB

Disk

/ :- Used: 42.08%
- Total :- 3.81 GB
- Used :- 1.61 GB
- Free :- 2.03 GB
/boot :- Used: 51.69%
- Total :- 42.52 MB
- Used :- 21.98 MB
- Free :- 20.54 MB
/home/pi/data :- Used: 1.51%
- Total :- 10.32 GB
- Used :- 159.17 MB
- Free :- 9.64 GB
/mnt/usbdrive :- Used: 0.25%
- Total :- 28.97 GB
- Used :- 72.96 MB
- Free :- 27.4 GB

HTTP

Server :- Apache/2.4.25 (Raspbian) HTTP/1.1 CGI/1.1 80

MySQL

Version :- 5.5.5-10.1.23-MariaDB-9+deb9u1
Host :- localhost:6379 (127.0.0.1)
Date :- 2019-05-21 09:14:34 (UTC -04:00‌)
Stats :- Uptime: 612 Threads: 4 Questions: 976 Slow queries: 0 Opens: 31 Flush tables: 1 Open tables: 25 Queries per second avg: 1.594

Redis

Version :- 3.2.6
Host :- localhost:6379
Size :- 177 keys (789.66K)
Uptime :- 0 days

MQTT Server

Version :- Mosquitto 1.4.10
Host :- localhost:1883 (127.0.0.1)

PHP

Version :- 7.0.30-0+deb9u1 (Zend Version 3.0.0)
Modules :- apache2handler | calendar v7.0.30-0+deb9u1 | Core v7.0.30-0+deb9u1 | ctype v7.0.30-0+deb9u1 | curl v7.0.30-0+deb9u1 | date v7.0.30-0+deb9u1 | dom v20031129 | exif v7.0.30-0+deb9u1 | fileinfo v1.0.5 | filter v7.0.30-0+deb9u1 | ftp v7.0.30-0+deb9u1 | gd v7.0.30-0+deb9u1 | gettext v7.0.30-0+deb9u1 | hash v1.0 | iconv v7.0.30-0+deb9u1 | igbinary v2.0.1 | json v1.4.0 | libxml v7.0.30-0+deb9u1 | mbstring v7.0.30-0+deb9u1 | mcrypt v7.0.30-0+deb9u1 | mosquitto v0.4.0 | mysqli v7.0.30-0+deb9u1 | mysqlnd vmysqlnd 5.0.12-dev - 20150407 - $Id: b5c5906d452ec590732a93b051f3827e02749b83 $ | openssl v7.0.30-0+deb9u1 | pcre v7.0.30-0+deb9u1 | PDO v7.0.30-0+deb9u1 | pdo_mysql v7.0.30-0+deb9u1 | Phar v2.0.2 | posix v7.0.30-0+deb9u1 | readline v7.0.30-0+deb9u1 | redis v4.1.1 | Reflection v7.0.30-0+deb9u1 | session v7.0.30-0+deb9u1 | shmop v7.0.30-0+deb9u1 | SimpleXML v7.0.30-0+deb9u1 | sockets v7.0.30-0+deb9u1 | SPL v7.0.30-0+deb9u1 | standard v7.0.30-0+deb9u1 | sysvmsg v7.0.30-0+deb9u1 | sysvsem v7.0.30-0+deb9u1 | sysvshm v7.0.30-0+deb9u1 | tokenizer v7.0.30-0+deb9u1 | wddx v7.0.30-0+deb9u1 | xml v7.0.30-0+deb9u1 | xmlreader v7.0.30-0+deb9u1 | xmlwriter v7.0.30-0+deb9u1 | xsl v7.0.30-0+deb9u1 | Zend OPcache v7.0.30-0+deb9u1 | zlib v7.0.30-0+deb9u1

Pi

Model :- Raspberry Pi 3 Model B+ Rev 1.3 - 1 GB (Sony UK)
SoC :- Broadcom BCM2835
Serial num. :- 5ABE4EF9
Temperature :- 47.77°C - 48.3°C
emonpiRelease :- emonSD-30Oct18
File-system :- read-write

Client Information

HTTP

Browser :- Mozilla/5.0 (Macintosh; Intel Mac OS X 10_14_4) AppleWebKit/605.1.15 (KHTML, like Gecko) Version/12.1 Safari/605.1.15
Language :- en-us

Window

Size :- 1268 x 798

Screen

Resolution :- 1680 x 1050

borpin · 2019-05-21T13:23:19.137Z

Neil:

I tested the graph buttons in an EmonCMS dashboard and in a node-RED embedded graph. I found the same behavior - buttons not working.

Did you clear browser cache or try a private window?

HTH (Hope That Helps)

borpin · 2019-05-21T13:27:10.956Z

Ah rats. Sorry, this is in the ‘graph’ module that is a separate git repository.

cd /var/www/emoncms/Modules/graph
git pull
git checkout master
git pull

borpin · 2019-05-21T13:46:15.208Z

glyn.hudson:

Please confirm the issues have been fixed

@glyn.hudson, On my VM install, it is fine, on the EmonPi the changes are not appearing. Both main emoncms and graph repos are on master currently. Refreshed browser and rebooted on the EmonPi.

Ran an emoncms update twice as well.

I should also have said this comment relates to the graphID.

Neil · 2019-05-21T13:51:13.168Z

It did help, so I cleared browser cache and tested with a bit more concentration. It seems it’s these buttons that are not working:

These buttons are working:

Except this button seems to exhibit slightly unusual behavior - the start date is preselected like this…

46%20AM1254×120 14 KB

And it seems to work as expected, until you press one of the (D,W,M,Y) buttons first, then you get this - missing start date. You can select a new start date but the graph does not update it’s time scale.

27%20AM1272×114 13.2 KB

Neil · 2019-05-21T14:02:00.993Z

Sorry, I missed your post while writing my last post.

borpin:

Ah rats. Sorry, this is in the ‘graph’ module that is a separate git repository.
cd /var/www/emoncms/Modules/graph
git pull
git checkout master
git pull

I tested again and all buttons seem to be working normally now.

The graph ID is also visible now.

Good progress, great work, you guys are great!

glyn.hudson · 2019-05-24T22:24:55.420Z

These fixes are now in the Stable branch of the graph repo. Thanks again for your help everyone. Have a nice weekend